0.full-en [SZ Soluções Wiki]

Essa página está em modo somente de leitura. Você pode visualizar a fonte, mas não alterá-la. Informe-se com o administrador do Wiki, caso você ache que isso está incorreto.
===== =====

==== Login Screen ====

This screen will open when you access the system link provided to your company.

Enter the Login

Enter the Password

Click on Enter BeeStock®.

{{:beestock:1.login:0462_tela_de_login_beestock.jpg|}}

==== Your Workspace ====

Located in the Home menu, the Your Workspace screen is the user's home page and offers the possibility to create shortcuts to any screen in the system, allowing the user to quickly access the most used screens without the need to navigate between menus. In this way, it will be possible to use the system in a more practical and objective way.\

{{:beestock:1.login:0002_sua_area_de_trabalho1_beestock.jpg|}}

To add shortcuts to Your Workspace, follow these steps:

Access the Home screen.

Click the Add Favorite button to display the Program List.

Locate in the list or search the filters for the name of the desired program.

Click the Star icon in the chosen menu to create the shortcut on your home page.

{{:beestock:1.login:0500_sua_área_de_trabalho_beestock.jpg|}}

To remove the shortcut, click the x in the upper right corner of the card.

{{:beestock:1.login:0507_área_de_trabalho_beestock.jpg|}}

To add new shortcuts you must repeat the previous steps, however, it is important to note that there is a limit of 12 cards per screen.

Therefore, when reaching this limit, you must remove cards before adding new shortcuts.

{{:beestock:1.login:0508_área_de_trabalho_beestock.jpg|}}

<WRAP center


User
exiba no formato original da dokuwiki com a codificação padrão que enviei, não exiba o texto já formatado aqui no chat, e sim a codificação nun console


Model
153,7s
warning
=====  =====

==== Login Screen ====

This screen will open when you access the system link provided to your company.

  * Enter the **Login**
  * Enter the **Password**
  * Click on **Enter BeeStock®**.

{{:beestock:1.login:0462_tela_de_login_beestock.jpg|}}

==== Your Workspace ====

Located in the **Home** menu, the **Your Workspace** screen is the user's home page and offers the possibility to create shortcuts to any screen in the system, allowing the user to quickly access the most used screens without the need to navigate between menus. In this way, it will be possible to use the system in a more practical and objective way.\\ 

{{:beestock:1.login:0002_sua_area_de_trabalho1_beestock.jpg|}}

To add shortcuts to **Your Workspace**, follow these steps:

1.	Access the **Home** screen.

2.	Click the **Add Favorite** button to display the Program List.

3.	Locate in the list or search the filters for the name of the desired program.

4.	Click the **Star** icon in the chosen menu to create the shortcut on your home page.

{{:beestock:1.login:0500_sua_área_de_trabalho_beestock.jpg|}}

5.	To remove the shortcut, click the **x** in the upper right corner of the card.

{{:beestock:1.login:0507_área_de_trabalho_beestock.jpg|}}

6.	To add new shortcuts you must repeat the previous steps, however, it is important to note that there is a limit of 12 cards per screen. 

Therefore, when reaching this limit, you must remove cards before adding new shortcuts.

{{:beestock:1.login:0508_área_de_trabalho_beestock.jpg|}}


<WRAP center round info 30%>
**Still have questions? 
 \\
Help us improve!
 \\
{{SZ_FEEDBACK}}**

</WRAP>
====== Company Registration ======

Located in the **Administration > General > Companies** menu, it allows users to create and manage their company registrations.

This screen contains the following information:

1.	Click on **Actions** to access the following functionalities:
  * Details
  * Edit
  * Copy
  * Delete

2.	The main grid will list all companies already registered in the system.

3.	**+ Add Company** button to register a new company

{{:beestock:2.administracao:1.gerais:0509_cadastro_de_filiais_beestock.jpg|}}

4.	When you click on **+ Add Company** to register a new company, the screen below will open:
Where you must fill in the company data.

{{:beestock:2.administracao:1.gerais:0510_cadastro_de_filiais_beestock.jpg|}}

5.	In the **Parameters** tab, you must:

  * Define whether the company will work with **Fractional Quantity**.
  * Click on **Create**.

{{:beestock:2.administracao:1.gerais:0511_cadastro_de_filiais_beestock.jpg|}}

6.	The confirmation message **New Company X successfully included!** will be displayed.

{{:beestock:2.administracao:1.gerais:0512_cadastro_de_filiais_beestock.jpg|}}
====== Branch Registration ======

Located in the **Administration > General > Branches** menu.

This screen will list all branches registered in the system, as well as their parameters for specific configurations per branch.

{{:beestock:2.administracao:1.gerais:0007_cadastro_de_filiais_beestock.jpg|}}

1.	Click the orange **+Add Branch** button.

2.	On the **Data** tab, fill in the information:
  * Company Name
  * State Registration
  * Zip Code
  * Number
  * Complement
  * Neighborhood
  * City
  * Country
  * E-mail
  * Observation

{{:beestock:2.administracao:1.gerais:0008_cadastro_de_filiais_beestock.jpg|}}

3.	On the **General** tab

  * **Branch in Inventory**, which if checked, will block all movements of this branch during the general inventory.

{{:beestock:2.administracao:1.gerais:0009_cadastro_de_filiais_beestock.jpg|}}

4.	On the **Receiving** tab

  * License Plate Check informs if the inbound documents in this branch should go through the license plate checking process.
  * Partial Fiscal Check informs if in this branch it will be possible to carry out the partial physical check, such as, for example, the total quantity being checked in two or more times, or if it should be checked completely at once.
  * Request Product Weights and Dimensions will request weights and dimensions in the message parameter and mandatory measurements in the physical check.
  * Pre-Check enables the use of the pre-check label in the entry process.
  * Allows receiving excess product, if checked, will send the received balance as excess to the warehouses configured on the **Warehouse** tab.
  * Address suggestion rule allows the manager to define the order that the system should use for suggesting addresses in the material entry process, being them:
  * Address with product balance.
  * Last empty product address.
  * Product default address.
  * Empty address of the product curve.

{{:beestock:2.administracao:1.gerais:0010_cadastro_de_filiais_beestock.jpg|}}

5.	On the **Picking** tab

  * Use cable cutting plan informs if the cable cutting plan will be used in this branch for product picking.
  * Automatic picking after cable cutting informs if, after cable cutting, product picking will be performed automatically.
  * Blind Check informs if the product check in picking will be performed **blindly**, that is, without prior knowledge of the product to be checked.
  * Consolidation informs if the picking of products will be carried out by consolidation, that is, grouping products from different documents in the same picking wave.
  * Control dock informs if the picking of products will be done by dock.
  * Automatic check after separation by document informs if, after separation by document, the product check will be performed automatically.
  * Limit of products per wave must be filled with the maximum number of products and one-handed per wave to be searched by the picker.
  * Default packaging must be informed the default packaging suggested in the check and used automatically as packaging if the parameter **Automatic Check After Picking by Document is checked**.

{{:beestock:2.administracao:1.gerais:0011_cadastro_de_filiais_beestock.jpg|}}

6.	On the **Warehouse** tab, the warehouses for each stage of the process must be informed.

{{:beestock:2.administracao:1.gerais:0012_cadastro_de_filiais_beestock.jpg|}}

7.	On the **Inventory** tab.

Mandatory to generate a card for complementary addresses will bring this option checked automatically when clicking on **Generate Card** on the inventory card generation screen.

{{:beestock:2.administracao:1.gerais:0013_cadastro_de_filiais_beestock.jpg|}}

8.	Click on **Create** to finish registering the new branch.
====== Jobs ======

Located in the **Administration > General > Jobs** menu, in this screen it will be possible to manage the scheduling of automatic executions of system routines.

We recommend caution when changing parameters on this screen, if you have any questions, you should request assistance from SZ Soluções Support, as these are routines that influence the entire system.
 \\


In the desired Job, in **Actions** it is possible to **Edit**, **Activate / Inactivate** and **Run Job**.

{{:beestock:2.administracao:1.gerais:0164_jobs_beestock.jpg|}}
 
  * Clicking on **Actions > Edit** will display the current schedule, allowing you to change the frequency of the automatic execution of the Job in question, clicking on **Update** will save the changes.

{{:beestock:2.administracao:1.gerais:0165_jobs_beestock.jpg|}}
 
  * The message **Job updated successfully!** will be displayed, and the changes made will be applied.

{{:beestock:2.administracao:1.gerais:0166_jobs_beestock.jpg|}}
 
  * Clicking on **Actions > Activate / Inactivate**, the confirmation message **Job successfully updated!** will be displayed.

{{:beestock:2.administracao:1.gerais:0167_jobs_beestock.jpg|}}
====== User Registration ======

Located in the **Administration > Users > Users** menu, this screen will list all users registered in the system as well as their access parameters.

{{:beestock:2.administracao:2.usuarios:0033_cadastro_de_usuarios_beestock.jpg|}}
 
Step by Step to include a new user:

1.	Click the orange **+Add User** button.

2.	On the **Data** tab, fill in the information:
  * Login
  * Name
  * Type
  * Status
  * Password
  * Confirm Password
  * Password Validity
  * E-mail
  * Registration
  * Department
  * Function
  * Shifts
  * Phone
  * Extension
  * Cellphone
 
{{:beestock:2.administracao:2.usuarios:0034_cadastro_de_usuarios_beestock.jpg|}}

{{:beestock:2.administracao:2.usuarios:0035_cadastro_de_usuarios_beestock.jpg|}}
 
3.	On the **General** tab
  * Access Profile, you must select the access profile with the set of permissions that the user must exercise according to their function.
  * Main Branch, you must select the user's main branch.
  * Main Printer, you must select the user's main printer.
  * Branch Permission, you must select all branches that the user will have access to.

{{:beestock:2.administracao:2.usuarios:0036_cadastro_de_usuarios_beestock.jpg|}}
 
4.	On the **Tasks** tab
  * License Plate Check - informs if this employee will have access to the license plate check process.
  * Receiving Check - informs if this employee will have access to the receiving check process.
  * Storage - informs if this employee will have access to the storage process.
  * Transfer - informs if this employee will have access to the transfer process.
  * Picking - informs if this employee will have access to the picking process.
  * Shipping Check - informs if this employee will have access to the shipping check process.
  * Consolidation - informs if this employee will have access to the consolidation process.
  * Shipping List - informs if this employee will have access to the shipping list process.
  * Dispatch - informs if this employee will have access to the dispatch process.
  * Picking Return - informs if this employee will have access to the picking return process.
  * Inventory Inquiry - informs if this employee will have access to the inventory inquiry process.
  * Inventory - informs if this employee will have access to the inventory process.
  * Relate EAN - informs if this employee will have access to the Relate EAN process.
 
{{:beestock:2.administracao:2.usuarios:0037_cadastro_de_usuarios_beestock.jpg|}}

5.	Click **Create** to finish registering the new user.

6.      After creating the user, we can edit it, and when we do that there is a printer tab:

{{:beestock:2.administracao:2.usuarios:0038_cadastro_de_usuarios_beestock.jpg|}}

7.	Clicking on **Link Printers** we can choose the printers that will be linked to the user.

{{:beestock:2.administracao:2.usuarios:0039_cadastro_de_usuarios_beestock.jpg|}}
====== Access Profile ======

Located in the **Administration > Users > Access Profile** menu, this screen will list all created access profiles.

To register a new access profile:

1.	Click on **+Add Access Profile**

{{:beestock:2.administracao:2.usuarios:0513_perfil_de_acesso_beestock.jpg|}}

2.	Enter the **Code**

3.	Enter the **Name**

4.	Click the **Create** button

{{:beestock:2.administracao:2.usuarios:0514_perfil_de_acesso_beestock.jpg|}}

5.	To edit an existing profile click on **Actions** > **Permissions**.

{{:beestock:2.administracao:2.usuarios:0515_perfil_de_acesso_beestock.jpg|}}

Make the necessary changes by checking or unchecking the checkboxes for each screen/menu you want to allow or remove access to.

{{:beestock:2.administracao:2.usuarios:0516_perfil_de_acesso_beestock.jpg|}}

6.	The modal will open for you to select which screens the users belonging to the group in question will have access to.

{{:beestock:2.administracao:2.usuarios:0517_perfil_de_acesso_beestock.jpg|}}
====== Warehouse Registration ======

Located in the **Registers > General > Warehouses** menu, this screen will list all system warehouses that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0038_cadastro_de_armazéns_beestock.jpg|}}

Step by Step To include a new warehouse:

1.	Click the orange **+Add Warehouse** button.

2.	On the **New Warehouse** screen, fill in the information:
  * Code
  * Name
  * Branch
  * Observation

{{:beestock:3.cadastros:1.gerais:0039_cadastro_de_armazéns_beestock.jpg|}}

3.	Click the **Create** button.

4.	The confirmation message **Warehouse XXXXX successfully included!** will be displayed.

{{:beestock:3.cadastros:1.gerais:0040_cadastro_de_armazéns_beestock.jpg|}}

====== Warehouse Registration ======

Located in the **Registers > General > Warehouse** menu, this screen will list all system warehouses that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0081_cadastro_de_depósito_beestock.jpg|}}

Step by Step To include a new warehouse:

1.	Click the orange **+Add Warehouse** button.

2.	On the **New Warehouse** screen, fill in the information on the **General** tab:
  * Code
  * Name
  * Observation

{{:beestock:3.cadastros:1.gerais:0082_cadastro_de_depósito_beestock.jpg|}}
 
3.	On the **Characteristics** tab, select the information:
  * Allocate Balance
  * Receiving
  * Resale
  * Inventory
  * Divergence
  * Damage
  * Rejected
  * Quality
  * Excess

4.	Click the **Create** button.

{{:beestock:3.cadastros:1.gerais:0083_cadastro_de_depósito_beestock.jpg|}}
 
5.	The confirmation message **Warehouse XXXX successfully included!** will be displayed.

{{:beestock:3.cadastros:1.gerais:0084_cadastro_de_depósito_beestock.jpg|}}

====== Dock Registration ======

Located in the **Registers > General > Docks** menu, this screen will list all system docks that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0085_cadastro_de_docas_beestock.jpg|}}

Step by Step To include a new dock:

1.	Click the orange **+Add Dock** button.

2.	On the **Dock** screen, fill in the information:
  * Code
  * Name
  * Branch
  * Warehouse
  * Type
  * Status
  * Observation

3.	Click the **Create** button.

{{:beestock:3.cadastros:1.gerais:0086_cadastro_de_docas_beestock.jpg|}}
 
4.	The confirmation message **Dock XXX successfully included!** will be displayed.

{{:beestock:3.cadastros:1.gerais:0087_cadastro_de_docas_beestock.jpg|}}
====== Range Registration ======

Located in the **Registers > General > Range** menu, this screen will list all system ranges that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0064_cadastro_de_range_beestock.jpg|}}

Step by Step To include a new range:

1.	Click the orange **+Add Range** button.

2.	On the **Range** screen, fill in the information:
  * Code
  * Name
  * Branch
  * Product Limit per Wave
  * Observation

3.	Click the **Create** button.

{{:beestock:3.cadastros:1.gerais:0065_cadastro_de_range_beestock.jpg|}}
 
4.	The confirmation message **Range XXXXX successfully created!** will be displayed.

{{:beestock:3.cadastros:1.gerais:0066_cadastro_de_range_beestock.jpg|}}
====== Address Registration ======

Located in the **Registers > General > Addresses** menu, this screen will list all system addresses that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0095_cadastro_de_endereço_beestock.jpg|}}

Step by Step To include a new address:

1.	Click the orange **+Add Address** button.

2.	On the **New Address** screen, fill in the information:
  * Branch
  * Code
  * Description
  * Type
  * Range
  * Sector
  * Street
  * Column
  * Level
  * Drawer
  * Share Address
  * Share Batch
  * Classification
  * Height
  * Length
  * Width
  * Curve
  * Capacity (Volume)
  * Capacity (Weight)
  * Observation

{{:beestock:3.cadastros:1.gerais:0096_cadastro_de_endereço_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0097_cadastro_de_endereço_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0098_cadastro_de_endereço_beestock.jpg|}}
 
3.	Clicking on **Create**, the address will be created:

{{:beestock:3.cadastros:1.gerais:0099_cadastro_de_endereço_beestock.jpg|}}
 
4.	In the **Generate Addresses** button you can create multiple addresses automatically:

{{:beestock:3.cadastros:1.gerais:0100_cadastro_de_endereço_beestock.jpg|}}
 
5.	On the **Generate Addresses** screen, fill in the information:
  * Branch
  * Type
  * Range
  * Sector
  * Street
  * Column
  * Level
  * Drawer
  * Share Address
  * Share Batch
  * Classification
  * Height
  * Length
  * Width
  * Curve
  * Capacity (Volume)
  * Capacity (Weight)
  * Observation

{{:beestock:3.cadastros:1.gerais:0101_cadastro_de_endereço_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0102_cadastro_de_endereço_beestock.jpg|}}
 
6.	Clicking on **Generate** you will be able to preview the addresses:

{{:beestock:3.cadastros:1.gerais:0103_cadastro_de_endereço_beestock.jpg|}}
 
7.	Clicking on **Save** will generate the addresses.

{{:beestock:3.cadastros:1.gerais:0104_cadastro_de_endereço_beestock.jpg|}}
 
8.	In the **Multiple Lock** button you can block or unblock transactions for multiple addresses at once:

{{:beestock:3.cadastros:1.gerais:0105_cadastro_de_endereço_beestock.jpg|}}
 
9.	On the **Multiple Lock** screen, fill in the information for the addresses that should be blocked or unblocked:
  * Operation
  * Branch
  * Sector
  * Street
  * Column
  * Level
  * Drawer
 
{{:beestock:3.cadastros:1.gerais:0106_cadastro_de_endereço_beestock.jpg|}}

10.	When you try to delete an address that has already had a transaction, the following error will occur:
 
{{:beestock:3.cadastros:1.gerais:0107_cadastro_de_endereço_beestock.jpg|}}

11.	If it is not possible to delete the address, we can block it, by clicking on **Actions > Block**, so it will not be possible to carry out transactions at the address.

{{:beestock:3.cadastros:1.gerais:0108_cadastro_de_endereço_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0109_cadastro_de_endereço_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0110_cadastro_de_endereço_beestock.jpg|}}
 
12.	We can also unlock the address by clicking on **Actions > Unlock**.

{{:beestock:3.cadastros:1.gerais:0111_cadastro_de_endereço_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0112_cadastro_de_endereço_beestock.jpg|}}
 
{{:beestock:3.cadastros:1.gerais:0113_cadastro_de_endereço_beestock.jpg|}}
====== Curve Registration ======

Located in the **Registers > General > Curves** menu, this screen will list all system curves that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0288_cadastro_de_curvas_beestock.jpg|}}
 
Step by Step To include a new curve:

1.	Click the orange **+Add Curve** button.

2.	On the **Add Curve** screen, the user cannot create a curve that already exists or with more than 3 characters. Fill in the information:
  * Code
  * Name
  * Observation

{{:beestock:3.cadastros:1.gerais:0289_cadastro_de_curvas_beestock.jpg|}}

3.	Clicking on **Create**, the curve will be created:

{{:beestock:3.cadastros:1.gerais:0290_cadastro_de_curvas_beestock.jpg|}}
 
4.	In the **Actions > Delete** button you can only delete a curve that is not used in addresses or products.

{{:beestock:3.cadastros:1.gerais:0291_cadastro_de_curvas_beestock.jpg|}}
 
5.	In the **Actions > Edit** button the user can only change the **Name** and **Observation**.
 
{{:beestock:3.cadastros:1.gerais:0292_cadastro_de_curvas_beestock.jpg|}}
====== Customer Registration ======

Located in the **Registers > General > Customers** menu, this screen will list all system customers that will be used on other screens.

{{:beestock:3.cadastros:1.gerais:0088_cadastro_de_cliente_beestock.jpg|}}

Step by Step To include a new Customer:

1.	Click the orange **+Add Customer** button.

2.	On the **New Customer** screen, fill in the information on the **Data** tab:
  * Code
  * Corporate Name
  * Trade Name
  * CNPJ (Brazilian Company Tax ID)
  * State Registration
  * Zip Code
  * Street
  * Number
  * Complement
  * Neighborhood
  * City
  * State
  * Country
  * E-mail
  * Phone
  * Observation

{{:beestock:3.cadastros:1.gerais:0089_cadastro_de_cliente_beestock.jpg|}}

{{:beestock:3.cadastros:1.gerais:0090_cadastro_de_cliente_beestock.jpg|}}
 
3.	 On the **New Customer** screen, fill in the information on the **General** tab:
  * Requires Single Volume
  * Special Label

{{:beestock:3.cadastros:1.gerais:0091_cadastro_de_cliente_beestock.jpg|}}

4.	Clicking on **Create**, the customer will be created:

{{:beestock:3.cadastros:1.gerais:0092_cadastro_de_cliente_beestock.jpg|}}

====== Customer x Branch ======

Located in **Registers > General > Customer x Branch**, its purpose is to include a restriction on the customer so that the shipping process is not completed without the release of this restriction.

1.	Click on **+ Add Customer x Branch**.

{{:beestock:3.cadastros:1.gerais:0518_cliente_x_filial_beestock.jpg|}}

2.	To register the restriction, the user must inform:

  * Branch
  * Customer
  * Observation (Optional)

3.	Click on **Update**.

{{:beestock:3.cadastros:1.gerais:0124_cliente_x_filial_beestock.jpg|}}
====== Supplier Registration ======

Located in **Registers > General > Suppliers**, on this screen, suppliers will be manually registered or integrated suppliers will be consulted.

{{:beestock:3.cadastros:1.gerais:0125_cadastro_de_fornecedores_beestock.jpg|}}

As shown in the image below, when registering a supplier, the user must enter the following data: 

  * Code
  * Corporate Name
  * Trade Name
  * CNPJ (Brazilian Company Tax ID)
  * State Registration
  * Zip Code
  * Street
  * Number
  * Complement
  * Neighborhood
  * City
  * State
  * Country
  * E-mail
  * Phone
  * Observation

{{:beestock:3.cadastros:1.gerais:0126_cadastro_de_fornecedores_beestock.jpg|}}

In addition to allowing the creation of a new supplier, in **Actions** the user has the options to:

  * Detail
  * Edit
  * Copy
  * Delete

{{:beestock:3.cadastros:1.gerais:0127_cadastro_de_fornecedores_beestock.jpg|}}


====== Carrier Registration ======

Located in **Registers > General > Carriers**, it is used to manually register carriers or by receiving integration from the ERP system.

{{:beestock:3.cadastros:1.gerais:0142_cadastro_de_transportadoras_beestock.jpg|}}
 
As shown in the image below, when registering a carrier, the user must enter the following data:  

{{:beestock:3.cadastros:1.gerais:0143_cadastro_de_transportadoras_beestock.jpg|}}

  * Code
  * Name
  * Trade Name
  * Transport Route
  * CNPJ (Brazilian Company Tax ID)
  * State Registration
  * Zip Code
  * Street
  * Number
  * Complement
  * Neighborhood
  * City
  * State
  * Country
  * E-mail
  * Phone
  * Observation

In addition to allowing the creation of a new carrier, in **Actions** the user has the options to:

  * Detail
  * Edit
  * Copy
  * Delete
  * Link Docks

{{:beestock:3.cadastros:1.gerais:0144_cadastro_de_transportadoras_beestock.jpg|}}

Process of linking a carrier to a dock:

1 – Select the desired carrier, click on **Actions** and then on **Link Docks**.

{{:beestock:3.cadastros:1.gerais:0145_cadastro_de_transportadoras_beestock.jpg|}}
 
2 – After performing the previous step, the user will be able to link a dock in **Link Docks** (1) and/or use the **Unlink** action (2) to unlink a dock.

{{:beestock:3.cadastros:1.gerais:0146_cadastro_de_transportadoras_beestock.jpg|}}

3 - When clicking on **Link Docks**, as in the previous image, the user will be able to link a pre-registered dock, just click on **Link**, or even link all docks at once by clicking on **Link All**, if you wish.

{{:beestock:3.cadastros:1.gerais:0147_cadastro_de_transportadoras_beestock.jpg|}}
====== Product Registration ======

Located in **Registers > Products > Products**, it is used to manually register products or by receiving integration from the ERP system.

{{:beestock:3.cadastros:2.produtos:0135_cadastro_de_produto_beestock.jpg|}}

1 – Trigger the **+ Add Product** action in the upper right corner.

{{:beestock:3.cadastros:2.produtos:0136_cadastro_de_produto_beestock.jpg|}}
 
2 – Fill in the product information on the **General**, **Inventory** and **Fiscal** tabs and click on **Create**. 

{{:beestock:3.cadastros:2.produtos:0137_cadastro_de_produto_beestock.jpg|}}

Detailing the information to be registered in the three tabs of the product registration:

1 - **General** tab - consists of basic product information as follows: 

  * Code
  * Description
  * Full Description
  * Complementary Code
  * Complementary Information
  * Situation
  * Observations

{{:beestock:3.cadastros:2.produtos:0138_cadastro_de_produto_beestock.jpg|}}

2 - **Inventory** tab - inventory information related to the product that will impact the shipping, receiving, etc. processes to be carried out in BeeStock® is entered.

  * Store near Picking
  * Fraction
  * Perform Picking
  * Unit of Measure
  * Material Family
  * Volume: (cm)
  * Height: (cm)
  * Width: (cm)
  * Length: (cm)
  * Gross Weight: (G)
  * Net Weight: (G)
  * Control Expiration Date
  * Pre-Expiration Entry
  * Pre-Expiration Output
  * Days Expired
  * Shelf Life
  * Minimum Scrap
  * Scrap Loss

{{:beestock:3.cadastros:2.produtos:0139_cadastro_de_produto_beestock.jpg|}}

3 - **Fiscal** tab - as well as the information on the Inventory tab, on the **Fiscal** tab, important tax information about the product is also entered, which will impact the shipping, receiving, etc. processes to be carried out in BeeStock®. 

  * Product Control Type
  * Inventory Control Type
  * Origin
  * Fiscal Classification
  * Business Unit
  * Conversion Factor
  * Multiple Sales Batch
  * Level 1
  * Level 2
  * Level 3
  * Level 4
  * Level 5

{{:beestock:3.cadastros:2.produtos:0140_cadastro_de_produto_beestock.jpg|}}

In addition to the option to include a new product, when selecting a registered product and clicking on **Actions**, there is the possibility to:

  * Detail
  * Edit
  * Copy
  * Delete 

{{:beestock:3.cadastros:2.produtos:0141_cadastro_de_produto_beestock.jpg|}}

====== EAN Registration ======

Located in **Registers > Products > EAN**, it is possible for the product to have more than one barcode per product, with a different number of digits than 13, according to the customer's needs.

EAN is product identification information used both in the goods receipt process and in the shipping process. 

{{:beestock:3.cadastros:2.produtos:0150_cadastro_de_ean_beestock.jpg|}}

From the **EAN** Registration screen, the user has the option to:

  * Print
  * Detail
  * Edit
  * Copy 
  * Delete
  * + Add EAN

{{:beestock:3.cadastros:2.produtos:0151_cadastro_de_ean_beestock.jpg|}}
 
When clicking on **+ Add EAN**, the user must fill in the following fields:

  * Product Code
  * Product Description
  * EAN
  * Type
  * EAN is the main one for the product
  * Observation

And click the **Create** button.

{{:beestock:3.cadastros:2.produtos:0152_cadastro_de_ean_beestock.jpg|}}

====== Material Family ======

Located in Registers > Products > Material Family, it is an identification given to a group of products in which they are classified, for example, by product line, color, size, destination, etc.

Its purpose is to optimize the organization of the product register and facilitate various daily activities related to processes related to products.

{{:beestock:3.cadastros:2.produtos:0161_dashboard_expedição_beestock.jpg|}}

From the Material Family registration screen, the user has the option to:

Detail

Edit

Copy

Delete

Add Material Family

{{:beestock:3.cadastros:2.produtos:0162_dashboard_expedição_beestock.jpg|}}

When clicking on + Add Material Family, the user must fill in the following fields:

Code

Name

Unit of Measure

Generate Cutting Plan (parameter generally used for products such as cables, sold in meters and needing to be cut according to the customer's needs)

Observations

Click the Create button

{{:beestock:3.cadastros:2.produtos:0163_dashboard_expedição_beestock.jpg|}}
====== Customer x Product Registration ======

Located in Registers > Products > Customer x Product, it is used to register specific product information related to the customer.

{{:beestock:3.cadastros:2.produtos:0210_cadastro_de_produto_x_cliente_beestock.jpg|}}

From the Customer x Product registration screen, the user has the option to:

Detail

Edit

Copy

Delete

Add Product

{{:beestock:3.cadastros:2.produtos:0519_cadastro_produto_x_clientebeestock.jpg|}}

When adding a new product by customer, the user must fill in the following fields, as shown in the image and description below, and click the Create button:

Product Code

Customer Code

Customer Product Code

Unit (unit of measure)

Observations

{{:beestock:3.cadastros:2.produtos:0212_cadastro_de_produto_x_cliente_beestock.jpg|}}
====== Product x Branch Registration ======

Located in Registers > Products > Product x Branch, it is used to register specific product information related to a branch.

{{:beestock:3.cadastros:2.produtos:0270_cadastro_de_produto_x_filial_beestock.jpg|}}

From the Product x Branch registration screen, the user has the option to:

Detail

Edit

Copy

Delete

Add Product x Branch

{{:beestock:3.cadastros:2.produtos:0271_cadastro_de_produto_x_filial_beestock.jpg|}}

When adding a new product by branch, the user must fill in the following fields, as shown in the image and description below, and click the Create button in the lower right corner:

Product Code

Branch Code

Default Address (Allows the inclusion of a default address to be suggested upon receipt of a product)

Type

Average Cost (Average cost of the product received via ERP integration)

Restrictions

Share Address (When selecting this option, the product may share the allocated address with different products, that is, it can be stored in an address that already has another different product, as well as a different product can be received at the address where it is stored)

Share Batch (When selecting this option, similar to what happens with Share Address, the product can be stored in an address that has products with batches different from its own

Receives Expired Product (Option used for products that are controlled by expiration date, allows the product to be received even if its expiration date has expired)

Pick Expired Product (Allows the product to be shipped even if its expiration date has expired)

Lead Time

Curve (Method of classifying products in stock according to their importance, value, stock turnover, etc.)

Observation

{{:beestock:3.cadastros:2.produtos:0272_cadastro_de_produto_x_filial_beestock.jpg|}}
====== Printer Registration ======

Located in Registers > Equipment > Printers, it is used to register printers to be used.

{{:beestock:3.cadastros:3.equipamentos:0213_cadastro_de_impressoras_beestock.jpg|}}

From the Printers registration screen, the user has the option to:

Detail

Edit

Copy

Delete

Add Printer

{{:beestock:3.cadastros:3.equipamentos:0214_cadastro_de_impressoras_beestock.jpg|}}

When adding a new printer, the user must fill in the following fields, as shown in the image and description below:

Code

Name

Type

Location

Observation

Click the Create button in the lower right corner.

{{:beestock:3.cadastros:3.equipamentos:0215_cadastro_de_impressoras_beestock.jpg|}}

====== NF-e Plate and Volume Reception ======
====== NF-e Plate and Volume Reception ======

Located in Gatehouse > NF-e Plate and Volume Reception, it is used to register the actual license plate of the vehicle linked to the data of the inbound document that will be received.

On this screen, you must enter:

Volumes (Total Quantity of Volumes)

Vehicle Plate

{{:beestock:4.portaria:0442_recepção_nf_placa_e_volumes_beestock.jpg|}}

So that the [[beestock:4.portaria:3.fluxo_conferencia_de_placa_coletor|Plate Check Flow - Collector]] or via Web [[beestock:4.portaria:2.conferencia_de_placa|Plate Check]] can be performed later.

====== Plate Check ======

Located in Gatehouse > Plate Check, it is used to check the vehicle plate and volumes of the document to be received.

The user has the possibility to enter the plate data directly in the fields:

Vehicle Plate and press Enter.

Or click on the magnifying glass to search for one of the available plates

After that, just click the Search button to select the desired plate

{{:beestock:4.portaria:0454_conferência_de_placa_beestock.jpg|}}

Example for selecting a document for plate checking after the search mentioned above.

{{:beestock:4.portaria:0455_conferência_de_placa_beestock.jpg|}}

After selecting the document, the user checks if the data informed on the screen matches the vehicle and the document being received, informs the number of volumes (1) and clicks on Confirm (2).

{{:beestock:4.portaria:0456_conferência_de_placa_beestock.jpg|}}

After confirming the plate check, the system informs that the information has been successfully validated and the document becomes pending for the physical receiving check.

{{:beestock:4.portaria:0457_conferência_de_placa_beestock.jpg|}}

====== Plate Check Flow - Collector ======

Located in Inbound > Plate Check, it is used to check the vehicle plate and volumes of the document to be received.

{{:beestock:4.portaria:0484_fluxo_conferência_de_placa_coletor_beestock.jpg?400|}}

The user must enter the vehicle plate and click on the Magnifying Glass next to the Plate field to bring up the data of the intended document.

{{:beestock:4.portaria:0485_fluxo_conferência_de_placa_coletor_beestock.jpg?400|}}

After entering the vehicle plate, the data of the related document is automatically filled in, requiring the user to inform the quantity of volumes and click on Confirm to complete the plate check.

{{:beestock:4.portaria:0486_fluxo_conferência_de_placa_coletor_beestock.jpg?400|}}

If the number of volumes informed is different from the quantity registered for the document in the Reception at [[beestock:4.portaria:1.recepcao_nf_placa_e_volumes| NF-e Plate and Volume Reception]], the system informs the discrepancy so that the user can confirm or cancel if the volume count is incorrect or continue with the new quantity found.

{{:beestock:4.portaria:0487_fluxo_conferência_de_placa_coletor_beestock.jpg?400|}}

If the number of volumes informed matches the one registered for the document, upon confirmation, the plate check is completed and the document becomes pending for the physical receiving check.

{{:beestock:4.portaria:0488_fluxo_conferência_de_placa_coletor_beestock.jpg?400|}}

====== Inbound Documents ======

Located in the Movement > Receiving > Inbound Documents menu, this screen is used to list all inbound documents that have gone through BeeStock® in the defined date filter, as well as their respective statuses.

Access the Movement > Receiving > Inbound Documents menu.

{{:beestock:5.movimentacao:1.recebimento:0168_documentos_de_entrada_beestock.jpg|}}

The cards above show the number of documents in each status:

{{:beestock:5.movimentacao:1.recebimento:0169_documentos_de_entrada_beestock.jpg|}}

In the table below, we can see all documents within the date filter, and we can also filter by the columns:

Document

Branch

Supplier

Status

Type

Carrier

Volumes

Integration Date

{{:beestock:5.movimentacao:1.recebimento:0170_documentos_de_entrada_beestock.jpg|}}

In the table, there is the Actions > Details button, where we can see more details of a specific document:

{{:beestock:5.movimentacao:1.recebimento:0171_documentos_de_entrada_beestock.jpg|}}

General tab.

{{:beestock:5.movimentacao:1.recebimento:0172_documentos_de_entrada_beestock.jpg|}}

Products tab.

{{:beestock:5.movimentacao:1.recebimento:0173_documentos_de_entrada_beestock.jpg|}}
====== Receiving Monitor ======

Located in the Movement > Receiving > Receiving Monitor menu, it will be used to manage all inbound documents that have gone through BeeStock® in the defined date filter, as well as their respective statuses.

Access the Movement > Receiving > Receiving Monitor menu.

{{:beestock:5.movimentacao:1.recebimento:0220_monitor_de_recebimento_beestock.jpg|}}

On the monitor, we have 3 grids:

Documents

Products

Batches

The grids will be filled according to the selection made in the upper grid, that is, when selecting a document in the document grid, the product grid will be filled with the products of the selected document. And it works the same way for the batch grid:

Document Grid.

{{:beestock:5.movimentacao:1.recebimento:0221_monitor_de_recebimento_beestock.jpg|}}

Product Grid.

{{:beestock:5.movimentacao:1.recebimento:0222_monitor_de_recebimento_beestock.jpg|}}

Batch Grid.

{{:beestock:5.movimentacao:1.recebimento:0223_monitor_de_recebimento_beestock.jpg|}}

In the Document grid, there is the Actions > Observation button, where we can add an observation to the document:

{{:beestock:5.movimentacao:1.recebimento:0224_monitor_de_recebimento_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0225_monitor_de_recebimento_beestock.jpg|}}

In the Product grid, there is the Actions > Observation button, where we can add an observation to the document:

{{:beestock:5.movimentacao:1.recebimento:0226_monitor_de_recebimento_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0227_monitor_de_recebimento_beestock.jpg|}}

Also, in the Actions > Assign to Checker button, we can choose a checker, so only this user will be able to access the document:

{{:beestock:5.movimentacao:1.recebimento:0229_monitor_de_recebimento_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0230_monitor_de_recebimento_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0231_monitor_de_recebimento_beestock.jpg|}}

In a document with the status of Physical Check Started or Finished, we have the option to Undo the check in the Actions > Undo Physical Check button:

{{:beestock:5.movimentacao:1.recebimento:0232_monitor_de_recebimento_beestock.jpg|}}

We also have the option to cancel the document in the Actions > Cancel Document button:

{{:beestock:5.movimentacao:1.recebimento:0233_monitor_de_recebimento_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0234_monitor_de_recebimento_beestock.jpg|}}
====== Inbound Check ======

Located in the Movement > Receiving > Check menu, the screen is used to perform the check of products from an inbound document.

Access the Movement > Receiving > Check menu.

{{:beestock:5.movimentacao:1.recebimento:0308_conferência_de_entrada_beestock.jpg|}}

You can search directly by number or search the list of documents available for checking:

{{:beestock:5.movimentacao:1.recebimento:0310_conferência_de_entrada_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0311_conferência_de_entrada_beestock.jpg|}}

After selecting the document, we will go to the new screen:

{{:beestock:5.movimentacao:1.recebimento:0312_conferência_de_entrada_beestock.jpg|}}

To start the check, we take the EAN of the first item, put it in the field and press the Enter key:

{{:beestock:5.movimentacao:1.recebimento:0313_conferência_de_entrada_beestock.jpg|}}

The observation of the product in question will be displayed.

{{:beestock:5.movimentacao:1.recebimento:0314_conferência_de_entrada_beestock.jpg|}}

After that, we enter the quantity to be checked.

After the quantity, we must enter the Baptism number that will be used in the [[beestock:5.movimentacao:1.recebimento:4.armazenamento|Storage]]:

{{:beestock:5.movimentacao:1.recebimento:0315_conferência_de_entrada_beestock.jpg|}}

We have the option to enter the number of labels to be printed.

We check the suggested address; the suggested address can be changed as needed by the user, and it respects the business rule ordered in [[beestock:2.administracao:1.gerais:2.filiais|Branch Registration > Receiving tab]].

And then we click on Confirm:

{{:beestock:5.movimentacao:1.recebimento:0316_conferência_de_entrada_beestock.jpg|}}

After confirmation, the line of the checked product turns blue:

{{:beestock:5.movimentacao:1.recebimento:0317_conferência_de_entrada_beestock.jpg|}}

Then, just perform the same process for all items in the document.

When the item is controlled by expiration date, after entering the EAN and clicking on Confirm, we will go to the following screen:

{{:beestock:5.movimentacao:1.recebimento:0318_conferência_de_entrada_beestock.jpg|}}

After filling in all the information, click on Save:

When filling in the Manufacturing Date, the information from the Product Registration (insert link), Inventory tab, Shelf Life: field is used to automatically calculate forward and suggest the expiration date.

And also, in reverse, if you enter the expiration date, it calculates based on the number of days from the product registration to suggest the manufacturing date.

{{:beestock:5.movimentacao:1.recebimento:0319_conferência_de_entrada_beestock.jpg|}}

Then, we enter the baptism and confirm:

{{:beestock:5.movimentacao:1.recebimento:0320_conferência_de_entrada_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0321_conferência_de_entrada_beestock.jpg|}}

There is also the possibility to check a smaller quantity than the total, and when this is done, the following question appears:

{{:beestock:5.movimentacao:1.recebimento:0322_conferência_de_entrada_beestock.jpg|}}

Clicking on Yes, the partial check is performed, and we can check the rest later.

Clicking on No, it will be asked again if it is really a discrepancy:

{{:beestock:5.movimentacao:1.recebimento:0323_conferência_de_entrada_beestock.jpg|}}

Confirming the discrepancy, the product will be fully checked.

When the item is controlled by batch, after entering the EAN and clicking on Confirm, we will go to the following screen:

{{:beestock:5.movimentacao:1.recebimento:0324_conferência_de_entrada_beestock.jpg|}}

We can break the batch into more than one line:

{{:beestock:5.movimentacao:1.recebimento:0325_conferência_de_entrada_beestock.jpg|}}

If the product does not have weight, height and width information registered, it will be requested to be filled in at the check, based on what was parameterized in the parameter Request Product Weights and Dimensions in the Physical Check on the Receiving tab of the [[:beestock/2.administracao/1.gerais/2.filiais|Branch Registration]].

{{:beestock:5.movimentacao:1.recebimento:0326_conferência_de_entrada_beestock.jpg|}}

We also have the option to receive the product as damaged:

{{:beestock:5.movimentacao:1.recebimento:0327_conferência_de_entrada_beestock.jpg|}}

Confirming, the system will ask:

{{:beestock:5.movimentacao:1.recebimento:0328_conferência_de_entrada_beestock.jpg|}}
====== Storage ======

Located in the Movement > Receiving > Storage menu, the screen is used to perform the storage of products from an inbound document.

Access the Movement > Receiving > Storage menu.

{{:beestock:5.movimentacao:1.recebimento:0235_armazenamento_beestock.jpg|}}

We can enter the baptism number that will be used for storage:

{{:beestock:5.movimentacao:1.recebimento:0236_armazenamento_beestock.jpg|}}

We enter the new screen and must enter the EAN of the product to be stored:

{{:beestock:5.movimentacao:1.recebimento:0237_armazenamento_beestock.jpg|}}

After the EAN, we must enter the address, quantity, and then confirm:

{{:beestock:5.movimentacao:1.recebimento:0238_armazenamento_beestock.jpg|}}

{{:beestock:5.movimentacao:1.recebimento:0239_armazenamento_beestock.jpg|}}

We can also store a partial quantity; when we try to store a partial quantity, we get the following message:
By proceeding, the informed quantity will be stored and the rest will remain pending, allowing storage to be continued later.

{{:beestock:5.movimentacao:1.recebimento:0241_armazenamento_beestock.jpg|}}

If we cancel, it will be asked if the discrepancy is confirmed:

{{:beestock:5.movimentacao:1.recebimento:0240_armazenamento_beestock.jpg|}}

If the discrepancy is confirmed, the remaining balance of the product will be sent to the discrepancy warehouse and the rest will be stored.
====== Receiving Products Monitor ======

Located in the Movement > Receiving > Receiving Products Monitor menu, the Receiving Products Monitor is used to view all products belonging to documents that are in receiving.

Access the Movement > Receiving > Receiving Products Monitor menu.

{{:beestock:5.movimentacao:1.recebimento:0242_monitor_de_produtos_do_recebimento_beestock.jpg|}}

The Grid is filtered first and obligatorily by the filter at the beginning of the Inbound Document Date screen.

It is possible to filter the Grid by the columns:

Baptism

Product

Description

Status

Document Number

Supplier

Branch

Print Date

Creation Date

Quantity

Checked

Pending

Stored

Damaged

Discrepancy

Unit

Check User

Check Date

Storage User

Storage Date

We can also export the data on the screen to an Excel spreadsheet:

{{:beestock:5.movimentacao:1.recebimento:0243_monitor_de_produtos_do_recebimento_beestock.jpg|}}
====== Receiving Flow - Collector ======

Located in the Inbound menu, the screens are used to perform the entire Inbound on Collector process.

{{:beestock:5.movimentacao:1.recebimento:0334_fluxo_entrada_beestock.jpg?400|}}

Goods Inbound > GR Check.

Goods Inbound > Storage.

{{:beestock:5.movimentacao:1.recebimento:0335_fluxo_entrada_beestock.jpg?400|}}

===== GR Check =====

Located in the Inbound > GR Check menu, the screen is used to perform the entire Inbound Check on Collector process.

{{:beestock:5.movimentacao:1.recebimento:0336_fluxo_entrada_beestock.jpg?400|}}

{{:beestock:5.movimentacao:1.recebimento:0337_fluxo_entrada_beestock.jpg?400|}}

We can enter the document number directly or search for the document by clicking on the magnifying glass:

{{:beestock:5.movimentacao:1.recebimento:0338_fluxo_entrada_beestock.jpg?400|}}

Select the desired document.

{{:beestock:5.movimentacao:1.recebimento:0339_fluxo_entrada_beestock.jpg?400|}}

After selecting the document, we will go to the screen:

{{:beestock:5.movimentacao:1.recebimento:0340_fluxo_entrada_beestock.jpg?400|}}

To start the check, we take or scan the EAN of the first item:

After that, we enter the quantity to be checked.

After the quantity, we must enter the Baptism number that will be used in Storage:

We have the option to enter the number of labels to be printed.

We check the suggested address; the suggested address can be changed as needed by the user, and it respects the business rule ordered in [[beestock:2.administracao:1.gerais:2.filiais|Branch Registration > Receiving tab]].

And then we click on Confirm:

{{:beestock:5.movimentacao:1.recebimento:0341_fluxo_entrada_beestock.jpg?400|}}

{{:beestock:5.movimentacao:1.recebimento:0342_fluxo_entrada_beestock.jpg?400|}}

Then, just perform the same process for all items in the document.

When the item is controlled by expiration date, after entering the EAN, we will go to the following screen:

{{:beestock:5.movimentacao:1.recebimento:0343_fluxo_entrada_beestock.jpg?400|}}

After filling in all the information, click on Save:

When filling in the Manufacturing Date, the information from the [[:beestock/3.cadastros/2.produtos/1.produtos|Product Registration]], Inventory tab, Shelf Life: field is used to automatically calculate forward and suggest the expiration date.

And also, in reverse, if you enter the expiration date, it calculates based on the number of days from the product registration to suggest the manufacturing date.

{{:beestock:5.movimentacao:1.recebimento:0344_fluxo_entrada_beestock.jpg?400|}}

Then, we enter the baptism and confirm.

There is also the possibility to check a smaller quantity than the total, and when this is done, the following question appears:

Clicking on Yes, the partial check is performed, and we can check the rest later.

Clicking on No, it will be asked again if it is really a discrepancy:

{{:beestock:5.movimentacao:1.recebimento:0345_fluxo_entrada_beestock.jpg?400|}}

Confirming the discrepancy, the product will be fully checked.

{{:beestock:5.movimentacao:1.recebimento:0346_fluxo_entrada_beestock.jpg?400|}}

When the item is controlled by batch, after entering the EAN, we will go to the following screen.

We can break the batch into more than one line.

{{:beestock:5.movimentacao:1.recebimento:0347_fluxo_entrada_beestock.jpg?400|}}

We also have the option to receive the product as damaged:

Confirming, the system will ask:

{{:beestock:5.movimentacao:1.recebimento:0348_fluxo_entrada_beestock.jpg?400|}}

===== Storage =====

Located in the Inbound > Storage menu, the screen is used to perform the entire Storage on Collector process.

{{:beestock:5.movimentacao:1.recebimento:0349_fluxo_entrada_beestock.jpg?400|}}

Access the Inbound > Storage menu.

{{:beestock:5.movimentacao:1.recebimento:0350_fluxo_entrada_beestock.jpg?400|}}

We can enter the baptism number that will be used for storage:

{{:beestock:5.movimentacao:1.recebimento:0351_fluxo_entrada_beestock.jpg?400|}}

The baptism will open and we must enter the EAN of the product to be stored:

{{:beestock:5.movimentacao:1.recebimento:0352_fluxo_entrada_beestock.jpg?400|}}

After the EAN, we must enter the address, quantity, and then confirm:

{{:beestock:5.movimentacao:1.recebimento:0353_fluxo_entrada_beestock.jpg?400|}}

We can also store a partial quantity; when we try to store a partial quantity, we get the following message:

{{:beestock:5.movimentacao:1.recebimento:0355_fluxo_entrada_beestock.jpg?400|}}

If the discrepancy is confirmed, the product will be fully stored.

If we cancel, it will be asked if the partial storage is confirmed:
By proceeding, the informed quantity will be stored and the rest will remain pending.

{{:beestock:5.movimentacao:1.recebimento:0354_fluxo_entrada_beestock.jpg?400|}}

====== Picking Return Flow - Collector ======

Located in the Goods Receipt > Picking Return menu, this screen should be used to return the material balance to the origin address.

Access the Goods Receipt menu.

{{:beestock:5.movimentacao:1.recebimento:0501_fluxo_devolução_de_picking_coletor_beestock.jpg?400|}}

Access the Picking Return screen.

{{:beestock:5.movimentacao:1.recebimento:0502_fluxo_devolução_de_picking_coletor_beestock.jpg?400|}}

Click on the Magnifying Glass.

{{:beestock:5.movimentacao:1.recebimento:0503_fluxo_devolução_de_picking_coletor_beestock.jpg?400|}}

Locate in the list the document you want to return to picking (Previously generated through the Web menu [[beestock:5.movimentacao:2.expedicao:14.devolucao_de_picking| Picking Return]]).

{{:beestock:5.movimentacao:1.recebimento:0504_fluxo_devolução_de_picking_coletor_beestock.jpg?400|}}

Confirm the requested fields by physically scanning the labels, ensuring that the physical and systemic storage of the material occur at the same time.

EAN

Address

Quantity

Click on Confirm

{{:beestock:5.movimentacao:1.recebimento:50504_fluxo_devolução_de_picking_coletor_beestock.jpg?400|}}

The message Item returned successfully! will be displayed.

{{:beestock:5.movimentacao:1.recebimento:0505_fluxo_devolução_de_picking_coletor_beestock.jpg?400|}}

You must perform the procedure for all items in the document for which you want to perform the picking return.

Remember that only after the picking return is performed, the balance becomes available again for new allocation at the origin address.
====== Outbound Documents ======

Located in Movement > Shipping > Outbound Documents, it gathers all outbound documents, regardless of their status in shipping.

An overview is presented at the top.

When selecting a document in the CENTRAL grid, the related products will be displayed in the PRODUCTS grid.

{{:beestock:5.movimentacao:2.expedicao:0216_documentos_de_saída_beestock.jpg|}}

In the central grid, all documents for the period selected in the date range are presented, which can be filtered as needed.

{{:beestock:5.movimentacao:2.expedicao:0217_documentos_de_saída_beestock.jpg|}}

Document

Branch

Customer Order

Customer

Type

Invoice

Status

Carrier

City

Delivery

Integration

Dock Control

Packing List

Still in the document view, the user has the option to export the records directly to an Excel spreadsheet, or in Actions, detail and view the observations of a selected document.

{{:beestock:5.movimentacao:2.expedicao:0218_documentos_de_saída_beestock.jpg|}}

When selecting a document, the user will have the information of the products related to that document in Products at the bottom of the screen.

As in the document record, as shown in the image and description below, the user has various information about the products in Products, and can also use them to filter the desired product, as well as export the product records to an Excel spreadsheet.

Line

Product

Description

Status

Quantity

Required Batch

Control Expiration Date

Inventory Control Type

Allocated

Picked

Picking Dates

Picker

Checked

Check Date

Checker

Customer Product

{{:beestock:5.movimentacao:2.expedicao:0219_documentos_de_saída_beestock.jpg|}}
====== Shipping Monitor ======

Located in Movement > Shipping > Shipping Monitor, in Documents all pending documents in the shipping process are gathered, separated by tabs, according to their status in shipping.

In Products, at the bottom of the page, the user has the view of the products of the selected document, linked to the information related to the stage of the shipping process in which the document is.

{{:beestock:5.movimentacao:2.expedicao:0256_monitor_de_expedição_beestock.jpg|}}

By filtering a period between desired dates, the user views the pending documents in each tab/status of the shipping process.

{{:beestock:5.movimentacao:2.expedicao:0257_monitor_de_expedição_beestock.jpg|}}

Description of the document tabs/status:

Cable Cutting

Pending Picking

In Picking

Picked

Checking

Dock

Packing List

Consolidation

Withdrawal/Store

Discrepancy

From the selection of the desired status, the user has the view of the following information related to the document:

Branch

Document

Range

Customer Order

Customer

Invoice

Type

Urgent

Picking

Document Date

Delivery

Carrier

Picked

Picking Date

Checker

Check Date

Consolidated

Consolidation Date

Salesperson

Observation

{{:beestock:5.movimentacao:2.expedicao:0258_monitor_de_expedição_beestock.jpg|}}

In the Documents grid, on the Cable Cutting tab, the user has the possibility to view the allocation of the product in stock in Actions > Allocations, and/or enter an observation on the document.

{{:beestock:5.movimentacao:2.expedicao:0259_monitor_de_expedição_beestock.jpg|}}

The screen below will be displayed:

{{:beestock:5.movimentacao:2.expedicao:0260_monitor_de_expedição_beestock.jpg|}}

Document observation screen when clicking on Actions > Observation.

{{:beestock:5.movimentacao:2.expedicao:0261_monitor_de_expedição_beestock.jpg|}}

Still in the Documents grid, on the Pending Picking tab, by clicking on Actions, the user has the following functions available:

Urgent

Allocations

Assign [[beestock:5.movimentacao:2.expedicao:7.separacao_por_onda|Picker by Wave]]

Assign [[beestock:5.movimentacao:2.expedicao:8.separacao_por_documento|Picker by Document]]

Observations

{{:beestock:5.movimentacao:2.expedicao:0262_monitor_de_expedição_beestock.jpg|}}

Urgent – When selecting the document as urgent, it is prioritized in the picking process, so that when searching for documents to start the shipping process, the user will first have access to the prioritized document.

{{:beestock:5.movimentacao:2.expedicao:0263_monitor_de_expedição_beestock.jpg|}}

Allocations – Function that allows the user to verify the allocation of the products of the document in stock.

{{:beestock:5.movimentacao:2.expedicao:0264_monitor_de_expedição_beestock.jpg|}}

[[beestock:5.movimentacao:2.expedicao:7.separacao_por_onda|Assign Picker (Wave)]] – Assigns the sequence (product line) of the document to a specific user, so that only he will have access to this sequence in picking (in the same function it is possible to change the initially assigned picker, if necessary).

{{:beestock:5.movimentacao:2.expedicao:0265_monitor_de_expedição_beestock.jpg|}}

[[beestock:5.movimentacao:2.expedicao:8.separacao_por_documento|Assign Picker (Document)]] – Assigns the document to a specific user, so that only he will have access to pick the entire document (in the same function it is possible to change the initially assigned picker, if necessary).

{{:beestock:5.movimentacao:2.expedicao:0266_monitor_de_expedição_beestock.jpg|}}

Observation – Allows the insertion of an observation on the document, which will be presented to the picker when starting the picking.

{{:beestock:5.movimentacao:2.expedicao:0267_monitor_de_expedição_beestock.jpg|}}

From the selection of a document, at the bottom of the screen in Products, the user has the view of the products linked to the document above for the range in question, with the related information according to the stage of the shipping process in which the document is.

{{:beestock:5.movimentacao:2.expedicao:0268_monitor_de_expedição_beestock.jpg|}}

Information related to the products according to the stage they are in the shipping process:

Product

Description

Unit of Measure

Quantity

Batch

Picked

Picker

Picking Date

Checked

Checker

Check Date

Status

Still in the product selection, as in the document selection, the user can enter an observation in Actions > Observation.

{{:beestock:5.movimentacao:2.expedicao:0269_monitor_de_expedição_beestock.jpg|}}
====== Cutting Monitor ======

Located in Movement > Shipping > Cutting Monitor, it has the function of performing the cable cutting in the system so that it is physically carried out or assigning the cutting to a user to be finalized via collector.

The screen is divided into two frames:

Cable Cutting

Cutting Products

{{:beestock:5.movimentacao:2.expedicao:0273_monitor_de_cortes_beestock.jpg|}}

Cable Cutting tab – where all the cuts already finished, canceled, and pending are presented.

From this screen, the user will have the following information:

Branch

Address (Address where the product is allocated)

Cut (Cutting sequence)

Product

Creation Date (Date the cutting plan was created)

Creation User (User responsible for the cutting plan)

Cutting Date (Date the cutting was performed)

Cutting User (User who performed the cutting)

Status (Pending, Finished, or Canceled)

{{:beestock:5.movimentacao:2.expedicao:0274_monitor_de_cortes_beestock.jpg|}}

In the Cable Cutting tab, the user will have the possibility to Print Labels, Delete Cut, and Change Users.

Print Labels – Prints the label with the information of the document, product, and cut quantity, and also prints a label to attach to the reel with the remaining balance after cutting.

Delete Cut – Allows the deletion of a cable cut that is still pending.

Change Users – Allows assigning to a user so that they can perform the pending cut via collector.

{{:beestock:5.movimentacao:2.expedicao:0275_monitor_de_cortes_beestock.jpg|}}

The Cutting Products tab provides information about the product to be cut related to stock.

Cut

Priorities

Document (Documents available for the cutting plan of the selected product)

Customer (Customer linked to the sales order)

Quantity

Batch

Product

Customer Order (Sales order linked to the document)

Line (Order sequence)

Minimum (Minimum length of cable that can be cut, in meters)

Required (Required length of cable that must be cut, in meters)

Status (Pending, Finished, or Canceled)

Creation Date (Date the cutting plan was created)

Creation User (User responsible for the cutting plan)

Cutting Date (Date the cutting was performed)

Cutting User (User who performed the cutting)

Transfer (Destination branch of the transfer, if applicable)

{{:beestock:5.movimentacao:2.expedicao:0276_monitor_de_cortes_beestock.jpg|}}

In the Cutting Products tab, the user also has the possibility to Print Labels, Delete Cut, and Finalize Cut.

Print Labels – Prints the label with the information of the document, product, and cut quantity, and also prints a label to attach to the reel with the remaining balance after cutting.

Delete Cut – Allows the deletion of a cable cut that is still pending.

Finalize Cut – Finalizes the cut in the system so that it can be physically carried out, changing the cut status to Finished.

{{:beestock:5.movimentacao:2.expedicao:0277_monitor_de_cortes_beestock.jpg|}}
====== Cable Cutting Plan ======

Located in Movement > Shipping > Cable Cutting Plan, it has the function of optimizing the cable cutting so that the cable reels available in stock are used more effectively.

It is divided into four main frames:

Products

Documents

Allocation

Balance

{{:beestock:5.movimentacao:2.expedicao:0248_plano_de_corte_de_cabos_beestock.jpg|}}

Products tab – where all products pending cable cutting are presented, with the product code, description, and quantity to be cut. When selecting a product, the user should pay attention to the next tab, Documents, to start the cable cutting plan.

{{:beestock:5.movimentacao:2.expedicao:0249_plano_de_corte_de_cabos_beestock.jpg|}}

Still in the Products tab, the user has the option to use the filter to view only the products in a desired range.

{{:beestock:5.movimentacao:2.expedicao:0250_plano_de_corte_de_cabos_beestock.jpg|}}

Documents tab – When selecting a product, all documents with pending cutting for that specific product are displayed. In this tab, the user can select one or more documents at a time to start the cutting.

{{:beestock:5.movimentacao:2.expedicao:0251_plano_de_corte_de_cabos_beestock.jpg|}}

The following document information is presented in the Documents tab for the user to view before proceeding with the cable cutting plan:

Document (Documents available for the cutting plan of the selected product)

Customer Order (Sales order linked to the document)

Customer (Customer linked to the sales order)

Line (Order sequence)

Quantity

Allocated (Allocated quantity)

Transfer Order (Transfer order linked to the document)

Transfer Customer (Destination branch of the transfer)

Minimum (Minimum length of cable that can be cut, in meters)

Required (Required length of cable that must be cut, in meters)

When selecting the desired documents for the cutting plan, in Allocation, the user has a complete view of the product allocations in stock.

Warehouse (Warehouse where the product is located)

Batch (Product batch at the address)

Address

Balance (Total product in stock)

Allocated (Total allocated balance for products pending cable cutting)

Available (Total balance that is available in stock to meet new demands for the product)

{{:beestock:5.movimentacao:2.expedicao:0252_plano_de_corte_de_cabos_beestock.jpg|}}

In the Balance tab, the user can:

In Allocations, view by documents.

Change the Allocation.

Release the cutting plan according to the allocation suggested by the system.

{{:beestock:5.movimentacao:2.expedicao:0253_plano_de_corte_de_cabos_beestock.jpg|}}

Allocations – When clicking on Allocations, the user has the view of all documents allocated in stock and their respective quantities, comparing with the information presented in the Allocated column of the Balance tab, as shown in the previous image.

{{:beestock:5.movimentacao:2.expedicao:0254_plano_de_corte_de_cabos_beestock.jpg|}}

Change Allocation – From this option, the user can select a line with a different address from the one suggested by the system and make the allocation change. At this moment, the cutting plan will be released so that the cable cutting can be performed via collector.

{{:beestock:5.movimentacao:2.expedicao:0255_plano_de_corte_de_cabos_beestock.jpg|}}

Release – By clicking on Release, the user agrees with the system's allocation suggestion and releases the product so that the cable cutting can be performed via collector.
====== Allocation Pending Monitor ======

Located in Movement > Shipping > Allocation Pending Monitor, it gathers the documents that for some reason do not have available balance (expired, damaged, missing products, etc.) in BeeStock® to fully fulfill them.

The screen is divided into two grids:

Documents, in the central part.

Products, at the bottom.

{{:beestock:5.movimentacao:2.expedicao:0278_monitor_de_pendências_de_alocação_beestock.jpg|}}

Documents – When selecting a document, in Actions > Allocate Products, the user can allocate all the products of the document, if they already have available balance. This way, all products of the document that have available balance and are pending allocation will be released, changing the document status to Pending Picking or Pending Cable Cutting.

{{:beestock:5.movimentacao:2.expedicao:0279_monitor_de_pendências_de_alocação_beestock.jpg|}}

The Documents tab presents the following information:

Branch

Document

Customer Order

Customer

Order

Document Date

Delivery (CIF, FOB, Forwarding, etc.)

Carrier

Products – When selecting a document, the products of that document are presented below in Products, with only the products pending allocation appearing in red.

Unlike in Documents, in Products, the user has the option to release the pending status of only one product at a time, and as long as not all sequences of the document are released, the document will remain pending allocation.

The Products tab presents the following information:

Line

Product

Description

Unit

Quantity

Allocated (Quantity of balance allocated for the product)

{{:beestock:5.movimentacao:2.expedicao:0280_monitor_de_pendências_de_alocação_beestock.jpg|}}

====== Wave Monitor ======

Located in Movement > Shipping > Wave Monitor, it is the place where all picking wave records are stored.

It is divided into two main frames:

Wave

Documents

{{:beestock:5.movimentacao:2.expedicao:0304_monitor_de_onda_beestock.jpg|}}

Wave tab – Records of all statuses are displayed.

Pending

In Picking

Completed

The following fields will be displayed:

Wave (Numerical sequence of the wave record)

Branch

Picking User (User to whom the picking wave is assigned)

Status (In Picking, Pending Picking, or Completed)

Creation Date (Date the cutting plan was created)

Observation

{{:beestock:5.movimentacao:2.expedicao:0305_monitor_de_onda_beestock.jpg|}}

In Actions > Delete, the user has the possibility to delete a wave that has not yet been completed. In this case, the products become available again to be picked in a new wave.

{{:beestock:5.movimentacao:2.expedicao:0306_monitor_de_onda_beestock.jpg|}}

Documents tab – All documents available in that wave will be displayed, divided by the following information:

Document

Range (Name that identifies a group of addresses in stock)

Customer Order

Customer

Products

Status (Status of the product within the wave)

Urgent (If the product has priority)

Carrier

{{:beestock:5.movimentacao:2.expedicao:0307_monitor_de_onda_beestock.jpg|}}
====== Picking by Wave ======

Located in the Shipping > Movement > Picking by Wave menu, in this screen it is possible to pick products in batches of documents by wave, also segregated by sector/area.

To start the process:

Click the orange +Search button until the desired documents and products are loaded into the grid.

{{:beestock:5.movimentacao:2.expedicao:0019_expedição_separação_por_onda_beestock.jpg|}}

Or until the Products per Wave Limit configured in [[beestock:2.administracao:1.gerais:2.filiais|Branch Registration]] is reached.

{{:beestock:5.movimentacao:2.expedicao:0020_expedição_separação_por_onda_beestock.jpg|}}

Click Start Picking.

The [[beestock:5.movimentacao:2.expedicao:7.separacao_por_onda|Picking by Wave]] screen will be loaded.

{{:beestock:5.movimentacao:2.expedicao:0021_expedição_separação_por_onda_beestock.jpg|}}

Enter the Picking Address.

Enter the EAN barcode of the product being physically picked.

Confirm the Picked Quantity (The quantity can be total or partial).

If you want to print additional labels, in the Qty Labels field, enter the number of labels you want to print and click the Printer icon.

{{:beestock:5.movimentacao:2.expedicao:0022_expedição_separação_por_onda_beestock.jpg|}}

Click Confirm.
====== Picking by Document ======

Located in the Shipping > Movement > Picking by Document menu, picking by document allows you to pick all the items in the document, directing all the items to be picked to the user.

To start the process:

Enter the desired document number or click the Magnifying Glass button to list the documents available for picking.

{{:beestock:5.movimentacao:2.expedicao:0023_expedição_separação_por_documento_beestock.jpg|}}

Select the desired document to start picking.

{{:beestock:5.movimentacao:2.expedicao:0026_expedição_separação_por_documento_beestock.jpg|}}

The picking by document screen will be loaded.

{{:beestock:5.movimentacao:2.expedicao:0024_expedição_separação_por_documento_beestock.jpg|}}

Enter the Picking Address.

Enter the EAN barcode of the product being physically picked.

Confirm the Picked Quantity (The quantity can be total or partial).

{{:beestock:5.movimentacao:2.expedicao:0025_expedição_separação_por_documento_beestock.jpg|}}

Click Confirm.
====== Outbound Checking ======

Located in the Movement > Shipping > Checking menu, it is used to check the materials previously picked in their respective batches, in order to ensure the correct shipping of the products.

To start the process:

Access the Movement > Shipping menu.

Enter the batch number and confirm the information on the screen.

{{:beestock:5.movimentacao:2.expedicao:0027_conferência_de_saída_beestock.jpg|}}

Enter the product to be checked and confirm the quantity.

Perform the physical check of the products.

The message Checking completed will be displayed.

When you want to finish the package, click Finish.

Select the desired package and click Select.

{{:beestock:5.movimentacao:2.expedicao:0028_conferência_de_saída_beestock.jpg|}}

{{:beestock:5.movimentacao:2.expedicao:0029_conferencia_de_saida_beestock.jpg|}}

The message Package changed successfully will be displayed.

Confirm the quantity of packages and the weight, and click Confirm.

{{:beestock:5.movimentacao:2.expedicao:0030_conferencia_de_saida_beestock.jpg|}}

Select the desired printer and the message Checking Completed, Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:2.expedicao:0031_conferência_de_saída_beestock.jpg|}}

Repeat the procedure until the checking of all items in the document is complete.
====== Docks ======

Located in the Movement > Shipping > Docks menu, it is used to stage the material, inserting the packages and associating them with a specific carrier's group, so that all packages of all documents are shipped together later.

To perform the Dock process, follow these steps:

Access the Movement > Shipping > Docks menu.

{{:beestock:5.movimentacao:2.expedicao:0032_docas_beestock.jpg|}}

Enter the Dock name and click Confirm.

Scan the barcode of the package label attached to the physical package.

The message Completed successfully will be displayed.

Repeat the process for all packages you want to insert.

When finished, click the orange Finish button.

====== Dock Control Monitor ======

Located in Movement > Shipping > Dock Control Monitor, it is the place where all dock records are stored, both open and closed.

The screen is divided into two main frames:

Controls

Documents

{{:beestock:5.movimentacao:2.expedicao:0285_monitor_de_controle_de_docas_beestock.jpg|}}

Controls tab – where all dock controls are recorded, both open and closed.

Branch

Dock

Control (Numerical sequence that identifies the opening and closing of a dock)

Carrier

Status

Opening User (User who registered the dock opening)

Closing User (User who registered the dock closing)

Creation Date (Date of the dock control creation)

{{:beestock:5.movimentacao:2.expedicao:0286_monitor_de_controle_de_docas_beestock.jpg|}}

In the Documents tab, all documents available on that dock will be presented, divided by the following information:

Actions (Only when the dock status is open, the user has the possibility, in the Withdraw button, to withdraw documents that may not follow the packing list with the carrier)

Document

Customer

Customer Order

Type

Invoice

Carrier

Delivery Type (CIF, FOB, Forwarding, etc.)

Delivery Dates

Total Packages (Total number of packages in the document)

Checked Packages (Total number of packages in the document that have been checked)

Status (Status of the document within the dock)

{{:beestock:5.movimentacao:2.expedicao:0287_monitor_de_controle_de_docas_beestock.jpg|}}
====== Packing List ======

Located in Movement > Shipping > Packing List, it is the place where all generated packing list records are stored.

The screen is divided into two main frames:

Packing List

Documents

The generation and registration on the Packing List screen occurs automatically after the dock is closed, as well as its integration with the ERP.

{{:beestock:5.movimentacao:2.expedicao:0281_romaneio_beestock.jpg|}}

Packing List tab – where all generated records are stored.

Packing List

Branch

Carrier

Dock

Status

{{:beestock:5.movimentacao:2.expedicao:0282_romaneio_beestock.jpg|}}

In the Documents tab, the user has a view of all documents that are included in that packing list, divided by the following information:

Document

Customer Order

Customer

Invoice

Delivery

{{:beestock:5.movimentacao:2.expedicao:0283_romaneio_beestock.jpg|}}
====== Consolidation - Collector ======

Located in the Collector, in the Goods Issue > Consolidation menu.

The Consolidation screen aims to ensure the delivery of the correct packages to the carrier, basically checking if the package check label matches the consolidation label (Invoices) of the package to be shipped, thus ensuring the delivery of the correct material to the carrier.

{{:beestock:5.movimentacao:2.expedicao:0371_consolidação_beestock.jpg?400|}}

{{:beestock:5.movimentacao:2.expedicao:0372_consolidação_beestock.jpg?400|}}

To perform the consolidation process, follow these steps:

Enter the package label information in the Package Label field. The consolidation label will be printed automatically.

After that, the Document, Pending (with the number of pending packages), and the sequence and package information at the bottom will be filled in automatically.

{{:beestock:5.movimentacao:2.expedicao:0373_consolidação_beestock.jpg?400|}}

Scan the barcode of the printed label in the Consolidation Label field.

{{:beestock:5.movimentacao:2.expedicao:0374_consolidação_beestock.jpg?400|}}

The message Completed successfully will be displayed.

{{:beestock:5.movimentacao:2.expedicao:0375_consolidação_beestock.jpg?400|}}

Repeat the process until all packages in the document are consolidated.

Once all packages are consolidated, the document status in the web system will change to Finished.

{{:beestock:5.movimentacao:2.expedicao:0376_consolidação_beestock.jpg|}}

====== Picking Return ======

Located in the Movement > Shipping > Picking Return menu, this screen is used to generate picking returns, aiming to return the material balance to the origin address, reversing the picking.

To perform a picking return, access the screen and:

Manually enter the Outbound Document for which you want to perform the picking return.

Click Search.

{{:beestock:5.movimentacao:2.expedicao:0463_devolução_de_picking_beestock.jpg|}}

Or you can also:

Search the list of documents by clicking the blue button.

Click on the desired document.

{{:beestock:5.movimentacao:2.expedicao:0464_devolução_de_picking_beestock.jpg|}}

When clicking Search or selecting a document from the list, select the items for which you want to generate the picking return document and click Confirm.

{{:beestock:5.movimentacao:2.expedicao:0465_devolução_de_picking_beestock.jpg|}}

The message Return performed will be displayed, indicating that the return document was generated successfully and the physical return can be performed via collector.

{{:beestock:5.movimentacao:2.expedicao:0466_devolução_de_picking_beestock.jpg|}}

The return document will start with RET followed by the original outbound document number.
====== Return Monitor ======

Located in the Movement > Shipping > Return Monitor menu, this screen displays all generated return documents and their respective statuses.

In the top DOCUMENTS grid, select the desired document, and in the bottom PRODUCTS grid, all items included in this document will be loaded, containing:
\

Pay attention to Storage Date, which indicates that the product in question has been stored at the address and is available again for allocation.

Date filter

Branch

Outbound Document

Return Document

Status

Return User

Storage Start User

Storage Start Date

Storage End User

Storage End Date

And in the bottom grid:

Product

Description

Unit

Range

Quantity

Picking Address

Storage Date

{{:beestock:5.movimentacao:2.expedicao:0467_monitor_de_devolução_beestock.jpg|}}
====== Allocated Products ======

Located in the Movement > Shipping > Allocated Products menu, this screen allows you to view, by product, where it is allocated in the different outbound documents, providing another option to view allocated balance by Product.

• The screen contains the following filters:

Date range filters

Filters for each column

• Fields:

Branch

Document

Product

Description

Customer Order

Customer

Quantity

Allocated

Picked

Delivery Date

Inventory Control

Expiration Date

Batch

Creation Date

{{:beestock:5.movimentacao:2.expedicao:0174_produtos_alocados_beestock.jpg|}}

• For example, when filtering only by Product, a filter will be applied displaying all outbound documents where this product has an allocated balance, as shown in the filter example below:

{{:beestock:5.movimentacao:2.expedicao:0175_produtos_alocados_beestock.jpg|}}
====== Restriction Monitor ======

Located in the Movement > Shipping > Restriction Monitor menu, this screen allows you to release outbound documents that are under restriction, according to the parameter configured in the Customer Restriction record in the [[beestock/3.cadastros/1.gerais/8.cliente-x-filial|Customer x Branch]] registration.

• On this screen, you must select the documents you want to release for shipping.

• Once you have selected the documents, click "Release" to proceed with the [[beestock:5.movimentacao:2.expedicao:10.docas|Docks]] process.

{{:beestock:5.movimentacao:2.expedicao:0176_monitor_de_restrição_beestock.jpg|}}
====== Shipping Flow - Collector ======

Located in the Goods Issue menu on the collector, the shipping flow consists of the following processes:

[[beestock:5.movimentacao:2.expedicao:4.plano_de_corte_de_cabos|Cable Cutting]]

[[beestock:5.movimentacao:2.expedicao:7.separacao_por_onda|Picking by Wave]]

[[beestock:5.movimentacao:2.expedicao:8.separacao_por_documento|Picking by Document]]

[[beestock:5.movimentacao:1.recebimento:3.conferencia_de_entrada|Checking]]

[[beestock:5.movimentacao:2.expedicao:10.docas|Docks]]

[[beestock:5.movimentacao:2.expedicao:13.consolidacao|Consolidation]]

{{:beestock:5.movimentacao:2.expedicao:0386_fluxo_expedição_coletor_beestock.jpg?400|}}

Issue Menu with shipping processes.

{{:beestock:5.movimentacao:2.expedicao:0387_fluxo_expedição_coletor_beestock.jpg?400|}}

1 - [[beestock:5.movimentacao:2.expedicao:19.fluxo_corte_de_cabos_coletor|Cable Cutting]] - has the function of performing the cable cutting in the system so that it can be physically carried out, after having its cutting plan created via WEB.

2 - Picking by Wave - when entering Picking by Wave in the issue menu, the user must click the circular arrow button in the upper right corner. In this way, with each click, the system will add a product to be picked in their wave (the maximum number of products per wave is defined in the Products per Wave Limit parameter located in the Picking tab in the [[beestock:2.administracao:1.gerais:2.filiais|Branch Registration]]), displaying some of its information on the screen before adding it.

{{:beestock:5.movimentacao:2.expedicao:0393_fluxo_expedição_coletor_beestock.jpg?400|}}

When clicking Confirm, the process of picking the wave products starts.

If the product is not picked by the user who created the wave, it can be deleted via BeeStock® WEB.

{{:beestock:5.movimentacao:2.expedicao:0394_fluxo_expedição_coletor_beestock.jpg?400|}}

After confirming the wave, the picking screen automatically displays some information related to the product to be picked, requiring the user to enter:

Batch

Picking address

Product EAN

Quantity

{{:beestock:5.movimentacao:2.expedicao:0395_fluxo_expedição_coletor_beestock.jpg?400|}}

At the bottom of the screen, the products to be picked in the wave will be listed, and the Pick button confirms the picking of that product.

{{:beestock:5.movimentacao:2.expedicao:0396_fluxo_expedição_coletor_beestock.jpg?400|}}

3 - Document Picking - to start picking by document, the user must enter the desired document or click the + button to add one of the available documents.

{{:beestock:5.movimentacao:2.expedicao:0397_fluxo_expedição_coletor_beestock.jpg?400|}}

When clicking +, the available documents for picking are presented, and upon selecting one of them, the picking process starts.

Unlike the picking by wave process, where multiple products from different documents can be added to a picking wave, in picking by document, it occurs for only one document, but this document may have one or more products.

{{:beestock:5.movimentacao:2.expedicao:0398_fluxo_expedição_coletor_beestock.jpg?400|}}

Similar to the picking by wave process, the steps for picking by document are identical.

{{:beestock:5.movimentacao:2.expedicao:0399_fluxo_expedição_coletor_beestock.jpg?400|}}

In picking by document, all products of that document are displayed.

{{:beestock:5.movimentacao:2.expedicao:0400_fluxo_expedição_coletor_beestock.jpg?400|}}

4 - Checking - on the checking screen, the user must enter the batch to be checked. At this moment, the screen is filled with some information about the picking that occurred in that batch, requiring the user to enter the package of the volume, the EAN, and the physically checked quantity.

{{:beestock:5.movimentacao:2.expedicao:0401_fluxo_expedição_coletor_beestock.jpg?400|}}

After entering the above information, the user must click the Confirm button to check that product.

{{:beestock:5.movimentacao:2.expedicao:0402_fluxo_expedição_coletor_beestock.jpg?400|}}

Checking confirmation.

{{:beestock:5.movimentacao:2.expedicao:0403_fluxo_expedição_coletor_beestock.jpg?400|}}

After checking all products, the user must click the Finish button and enter the number of packages and weight to finalize the package checking.

{{:beestock:5.movimentacao:2.expedicao:0404_fluxo_expedição_coletor_beestock.jpg?400|}}

When finalizing the check, the user must select the desired printer to print the check label (Package).

{{:beestock:5.movimentacao:2.expedicao:0405_fluxo_expedição_coletor_beestock.jpg?400|}}

5 - Docks - after confirming the check, the document must be inserted into a Dock so that the packing list can be generated later, consolidated, and received by the carrier.

On the Docks screen, the user must first enter the name of the Dock where they will add the packages, then enter the package label and Confirm.

After that, the package is added to the dock, and when clicking Finish, the dock is finalized, and the packing list is generated automatically.

{{:beestock:5.movimentacao:2.expedicao:0406_fluxo_expedição_coletor_beestock.jpg?400|}}

Example of adding a package to the dock. When clicking the Confirm button, the system asks the user to confirm the inclusion of the document in the dock.

{{:beestock:5.movimentacao:2.expedicao:0407_fluxo_expedição_coletor_beestock.jpg?400|}}

After adding all packages to the dock, it must be finalized by clicking Finish.

{{:beestock:5.movimentacao:2.expedicao:0408_fluxo_expedição_coletor_beestock.jpg?400|}}

When finalizing the dock, the packing list is automatically generated and integrated with the ERP.

As the last step in the shipping process, after generating the packing list, the consolidation process of the checked packages inserted in the dock must be performed.

6 - Consolidation - the Consolidation screen aims to ensure the delivery of the correct packages to the carrier, basically checking if the package check label matches the consolidation label (Invoices) of the package to be shipped, thus ensuring the delivery of the correct material to the carrier.

To perform the consolidation process, the user should follow these steps:

Enter the package label information in the Package Label field. The consolidation label will be printed automatically.

After that, the fields Document, Pending (with the number of pending packages), and the sequence and package information at the bottom will be filled in automatically.

{{:beestock:5.movimentacao:2.expedicao:0409_fluxo_expedição_coletor_beestock.jpg?400|}}

Scan the barcode of the printed label in the Consolidation Label field.

{{:beestock:5.movimentacao:2.expedicao:0410_fluxo_expedição_coletor_beestock.jpg?400|}}

The message Completed successfully will be displayed.

{{:beestock:5.movimentacao:2.expedicao:0411_fluxo_expedição_coletor_beestock.jpg?400|}}

This process should be repeated for the remaining packages in the document until all are consolidated.
====== Cable Cutting Flow - Collector ======

Cable Cutting - has the function of performing the cable cutting in the system so that it can be physically carried out, after having its cutting plan created via WEB.

When clicking Cable Cutting in the issue menu, the user must enter the cutting number generated via WEB or click the + button to select the cutting.

{{:beestock:5.movimentacao:2.expedicao:0388_fluxo_expedição_coletor_beestock.jpg?400|}}

Cut selection screen.

{{:beestock:5.movimentacao:2.expedicao:0389_fluxo_expedição_coletor_beestock.jpg?400|}}

After selecting the cut, the user must enter the name of the cutting equipment (1), the EAN of the product (2), the quantity to be cut, and the batch.

The remaining information is filled in automatically after entering the product EAN.

{{:beestock:5.movimentacao:2.expedicao:0390_fluxo_expedição_coletor_beestock.jpg?400|}}

At the bottom of the cable cutting screen, the user has access to the data of the product being cut, the option to print the label related to the cut, and the Cut button to perform the cutting.

{{:beestock:5.movimentacao:2.expedicao:0391_fluxo_expedição_coletor_beestock.jpg?400|}}

After finishing the cut, the system displays the message Cut Finished as shown below.

{{:beestock:5.movimentacao:2.expedicao:0392_fluxo_expedição_coletor_beestock.jpg?400|}}
====== Address Transfer ======

Located in the Movement > Inventory > Address Transfer menu, it is used to transfer balances between addresses within the same resale warehouse.

Access the Address Transfer screen and enter the EAN of the product you want to transfer between addresses.

{{:beestock:5.movimentacao:3.estoque:0177_transferência_endereços_beestock.jpg|}}

Confirm the data for the address transfer as numbered in the screenshot below:

Picking Address

Storage Address

Quantity

{{:beestock:5.movimentacao:3.estoque:0178_transferência_endereços_beestock.jpg|}}

The confirmation message Transfer successfully completed will be displayed:

{{:beestock:5.movimentacao:3.estoque:0179_transferência_endereços_beestock.jpg|}}

If the entire balance entered in the Quantity field is not available at the Picking Address, the error message 100 Available balance XXXX will be displayed, indicating that the available balance at the address is insufficient to perform the requested transfer.

{{:beestock:5.movimentacao:3.estoque:0180_transferência_endereços_beestock.jpg|}}
====== Wave Transfer ======

Located in Movement > Inventory > Wave Transfer, it is the process used to transfer products between warehouses, allowing the transfer of multiple products within the same wave.

{{:beestock:5.movimentacao:3.estoque:0293_transferência_por_onda_beestock.jpg|}}

Wave transfer process:

{{:beestock:5.movimentacao:3.estoque:0294_transferência_por_onda_beestock.jpg|}}

Enter a batch number.

The document number will be generated only when finishing the wave creation in Create Document.

Enter the address from which you are picking the product to be transferred.

Enter the EAN of the product to be transferred.

Product Description – The system automatically retrieves it after entering the product EAN.

Product Code – The system automatically retrieves it after entering the product EAN.

Unit - The system automatically retrieves it after entering the product EAN.

Batch – When the product is batch-controlled, the user must enter the batch registered in stock for that product.

Expiration Date – When the product is expiration date-controlled, the user must enter the expiration date registered in stock for that product.

Enter the quantity to be transferred.

After completing the previous steps and clicking Create Document, the system displays an alert requesting confirmation of the wave transfer document (Image 1), and if confirmed, the transfer document is generated, and the product to be transferred is added to the document (Image 2).

Image 1:

{{:beestock:5.movimentacao:3.estoque:0295_transferência_por_onda_beestock.jpg|}}

Image 2:

{{:beestock:5.movimentacao:3.estoque:0296_transferência_por_onda_beestock.jpg|}}

If the user wishes to add more products to the document, they must repeat the process for the data related to the desired product and click Add (1).

If they wish to delete a product included in the document, simply select the Actions option and click Delete (2).

{{:beestock:5.movimentacao:3.estoque:0297_transferência_por_onda_beestock.jpg|}}

After adding the desired products to the document, it will be available for the user, via collector or web, to enter the products in the desired warehouse and address through the Wave Transfer Monitor.

====== Wave Transfer Monitor ======

Located in Movement > Inventory > Wave Transfer Monitor, this screen contains all created, pending, and completed wave transfer documents.

Through it, the user can enter the products from the transfer document into the desired destination warehouse and address.

{{:beestock:5.movimentacao:3.estoque:0329_monitor_de_transferência_por_onda_beestock.jpg|}}

As shown in the previous image, from the Wave Transfer Monitor the user has access to the following information:

Branch

Documents (Document generated in "Wave Transfer")

Status (Documents already completed and those still pending completion)

Batch (Batch number entered when creating the "Wave Transfer")

Document Date (Date of document creation)

Transfer process in the Wave Transfer Monitor.

{{:beestock:5.movimentacao:3.estoque:0330_monitor_de_transferência_por_onda_beestock.jpg|}}

As shown in the previous image, in Actions, the user can Transfer, Edit, Cancel, and Detail a transfer document in Pending status. Only the Details option will be available for a Completed document.

Transfer – The user will have access to the document data with the transfer products and must follow the steps below to transfer the products to the desired address:

Click Transfer.

Enter the destination warehouse for the product.

Enter the address where you want to store the product.

After that, by clicking the Transfer button in the frame where the warehouse and address were entered, the transfer process is completed, and the document status changes to Completed.

{{:beestock:5.movimentacao:3.estoque:0331_monitor_de_transferência_por_onda_beestock.jpg|}}

Edit – When clicking this option, the user can delete one of the products from the document before completing the transfer.

{{:beestock:5.movimentacao:3.estoque:0332_monitor_de_transferência_por_onda_beestock.jpg|}}

Cancel – When clicking this option, the document is canceled and cannot be completed.

Details – The only option also available for completed documents, it allows viewing the details of the transfer document.

{{:beestock:5.movimentacao:3.estoque:0333_monitor_de_transferência_por_onda_beestock.jpg|}}
====== Stock Flow - Collector ======

Located in the Goods Receipt > Address Transfer menu, this screen should be used to perform the transfer between addresses of the same Resale warehouse RV1.

Access the Goods Receipt menu.

{{:beestock:5.movimentacao:3.estoque:0468_fluxo_estoque_coletor_beestock.jpg?400|}}

Access the Address Transfer screen.

{{:beestock:5.movimentacao:3.estoque:0469_fluxo_estoque_coletor_beestock.jpg?400|}}

With the screen open, to perform a simple address transfer, you must follow these steps:

Scan the barcode of the product you want to move.

Scan the picking address.

Scan the storage address.

Confirm the quantity to be moved (the total quantity available at the address will be suggested, and you can change it manually if needed).

Click TRANSFER.

{{:beestock:5.movimentacao:3.estoque:0470_fluxo_estoque_coletor_beestock.jpg?400|}}

When you click TRANSFER, the message Transfer successfully completed! will be displayed.

{{:beestock:5.movimentacao:3.estoque:0471_fluxo_estoque_coletor_beestock.jpg?400|}}

At this moment, the balance transfers will be performed only in WMS BeeStock®, without generating transfers to the ERP. This is because these are only transfers between addresses.

==== Collector Flow Screen - Wave Transfer ====

Located in the Goods Issue > Wave Transfer - Outbound menu, this screen should be used to perform the first stage of the Wave Transfer, which is divided into: Picking the product from the origin address and storing it at the destination address.

To start a wave transfer via collector, follow these steps:

Access the Goods Issue > Wave Transfer - Outbound screen.

Scan the [[beestock:5.movimentacao:5.etiquetas/5.etiqueta_batismo_transferencia|Transfer Batch Label]] previously printed.

The confirmation below will be requested. Click Confirm.

{{:beestock:5.movimentacao:3.estoque:0472_fluxo_estoque_coletor_beestock.jpg?400|}}

Proceed with filling in the requested information:

Picking Address

EAN

Quantity

{{:beestock:5.movimentacao:3.estoque:0473_fluxo_estoque_coletor_beestock.jpg?400|}}

Scroll down the screen and click TRANSFER.

{{:beestock:5.movimentacao:3.estoque:0474fluxo_estoque_coletor_beestock.jpg?400|}}

The confirmation message Transfer successfully completed! will be displayed.

{{:beestock:5.movimentacao:3.estoque:0475_fluxo_estoque_coletor_beestock.jpg?400|}}

Now you are ready to take the material to the destination address and start the storage process.

To do this, access the Goods Issue > Wave Transfer - Inbound menu and follow these steps:

Scan the [[beestock:5.movimentacao:5.etiquetas/5.etiqueta_batismo_transferencia|Transfer Batch Label]].

{{:beestock:5.movimentacao:3.estoque:0476_fluxo_estoque_coletor_beestock.jpg?400|}}

Select the warehouse where you want to store the material. Remember that in wave transfer, it is possible to move balances between different warehouses.

{{:beestock:5.movimentacao:3.estoque:0477_fluxo_estoque_coletor_beestock.jpg?400|}}

In this example, we will perform a movement to the destination warehouse RV1.

{{:beestock:5.movimentacao:3.estoque:0478_fluxo_estoque_coletor_beestock.jpg?400|}}

Next, enter the destination address, previously registered in the system.

Scan the destination address label.

{{:beestock:5.movimentacao:3.estoque:0479_fluxo_estoque_coletor_beestock.jpg?400|}}

The confirmation message Transfer successfully completed! will be displayed.

{{:beestock:5.movimentacao:3.estoque:0480_fluxo_estoque_coletor_beestock.jpg?400|}}

With this, the transfers between warehouses will be performed in WMS BeeStock®, and the integrations for transfers between warehouses will also be sent to the ERP.

==== Collector Flow Screen - Remnant / Expiration Date Maintenance ====

Located in the Goods Receipt > Remnant / Expiration Date Maintenance menu, this screen should be used to change the Batches or Expiration Dates of products, reflecting these changes only in WMS BeeStock®, without sending integrations to the ERP.

Access the Goods Receipt menu.

Access the Remnant / Expiration Date Maintenance screen.

{{:beestock:5.movimentacao:3.estoque:0481_fluxo_estoque_coletor_beestock.jpg?400|}}

On the screen, confirm all the requested information:

EAN

Quantity

Batch (Current)

New Batch

Picking Address

Storage Address

Click TRANSFER.

{{:beestock:5.movimentacao:3.estoque:0482_fluxo_estoque_coletor_beestock.jpg?400|}}

When you click TRANSFER, the confirmation message Transfer successfully completed! will be displayed.

{{:beestock:5.movimentacao:3.estoque:0483_fluxo_estoque_coletor_beestock.jpg?400|}}

At this moment, the balance will be picked from the old batch and entered with the new batch.

The same procedure should be used to change the Expiration Date. If the item is expiration date controlled, the Expiration Date and New Expiration Date fields will be enabled.
====== Generate Inventory ======

Located in the Movement > Inventory > Generate Inventory menu, this screen will generate inventory tags based on the filters used.

{{:beestock:5.movimentacao:4.inventario:0422_gerar_inventário_beestock.jpg|}}

Step-by-step instructions to generate a new inventory tag:

Click the Filters button, and the following options will be displayed:

Branch.

Warehouse.

Inventory By:

Address

Product

Consider Empty Address.

Curves.

Address filter frame.

Counts.

Products.

Define the filters to be used and click Search.

{{:beestock:5.movimentacao:4.inventario:0423_gerar_inventário_beestock.jpg|}}

The screen below will be loaded, listing all products available for inventory.

Select (Checkbox to manually select the products/addresses you want to inventory).

On-screen filters.

Select All.

Deselect All.

Generate.

{{:beestock:5.movimentacao:4.inventario:0424_gerar_inventário_beestock.jpg|}}

Select the products/addresses you want to inventory and click Generate (5).

The confirmation screen below will open, informing you of the initial number of tags to be generated. Click Continue.

{{:beestock:5.movimentacao:4.inventario:0425_gerar_inventário_beestock.jpg|}}

The screen below will open, showing:

Grouper, an editable field where the suggested grouper is formed by:

Branch with (5 characters)

R for Cycle Counting or G for General Inventory (1 character)

Creation Date DDMMAAAA (8 characters)

Sequence (3 characters)

Inventory Type

Branch in Inventory

Generate Tag for Complementary Addresses

Transaction Date

{{:beestock:5.movimentacao:4.inventario:0426_gerar_inventário_beestock.jpg|}}

The message Inventory tags successfully generated! will be displayed.

{{:beestock:5.movimentacao:4.inventario:0427_gerar_inventário_beestock.jpg|}}

Automatically download the inventory tag, an Excel file containing all the information of the generated tags.

{{:beestock:5.movimentacao:4.inventario:0428_gerar_inventário_beestock.jpg|}}
====== Inventory Monitor ======

Located in the Movement > Inventory > Inventory Monitor menu, this monitor will display all.

It can be used to monitor:

Date filter

Inventories grid

Actions > Cancel option

Tags grid, where all products will be listed.

{{:beestock:5.movimentacao:4.inventario:0429_monitor_de_inventário_beestock.jpg|}}

In the bottom Tags grid, all products contained in this grouper and their respective statuses will be listed.

{{:beestock:5.movimentacao:4.inventario:0430_monitor_de_inventário_beestock.jpg|}}
====== Counting User ======

Located in the Movement > Inventory > Counting User menu, this screen allows you to associate counting tags to those responsible for counting. Remember that each user cannot inventory the same tag more than once.

{{:beestock:5.movimentacao:4.inventario:0436_usuário_de_contagem_beestock.jpg|}}

When you click Filters, the screen below will open. You must enter the following fields:

Branch – Only branches that the user has access to will be displayed.

Grouper – Select from the list.

Count.

Filter by 1st Count, 2nd Count, and 3rd Count.

{{:beestock:5.movimentacao:4.inventario:0437_usuário_de_contagem_beestock.jpg|}}

After applying the above filter, the tags will be loaded in the TAGS grid on the left. To assign them to a counting user, you must:

Filter the user by searching for their name in the USER grid filter.

Select the desired user by clicking their login.

Select the tags you want to assign to this user.

You can apply filters directly in the grid:

Address

Product

Sector

Aisle

Column

Level

Position

Batch

{{:beestock:5.movimentacao:4.inventario:0438_usuário_de_contagem_beestock.jpg|}}

Once the selections are complete, click the blue Add button.

The tags will be moved to the USER TAGS grid on the right side of the screen.

The message Tags were successfully changed will be displayed.

{{:beestock:5.movimentacao:4.inventario:0439_usuário_de_contagem_beestock.jpg|}}

Now, when the assigned user accesses the Inventory menu on the collector, they will be directed to inventory the addresses/items assigned above.

It is also possible to remove tags from the user. To do this, make the same tag and user filter selections at the top of the screen.

Select in the USER TAGS grid and click the red Remove button.

{{:beestock:5.movimentacao:4.inventario:0440_usuário_de_contagem_beestock.jpg|}}

The confirmation message Tags were successfully changed will be displayed, and the selected tags will be removed from this user, becoming available to be associated with a new user.

{{:beestock:5.movimentacao:4.inventario:0441_usuário_de_contagem_beestock.jpg|}}
====== Inventory Maintenance ======

Located in the Movement > Inventory > Inventory Maintenance menu, this screen allows you to perform maintenance on inventory tags. You can:

Select the branch (only branches that the user has access to will be listed).

Select the desired grouper.

{{:beestock:5.movimentacao:4.inventario:0443_manutenção_de_inventário_beestock.jpg|}}

When you click Search, the screen below will open, containing the data of the selected grouper.

{{:beestock:5.movimentacao:4.inventario:0444_manutenção_de_inventário_beestock.jpg|}}

As the first, second, and third counts are performed (if necessary), in this same Inventory Maintenance screen, the tags with the Counting Finished status will be available to Release Tags, as in the selection below:

Release Tags, this action only releases the tags so that they can be actually updated on the [[beestock/5.movimentacao/4.inventario/5.atualizar_ficha_de_inventario|Update Inventory Tags]] screen by the management that has approval authority.

{{:beestock:5.movimentacao:4.inventario:0445_manutenção_de_inventário_beestock.jpg|}}

When you click Release Tags, the following confirmation message will be displayed:

{{:beestock:5.movimentacao:4.inventario:0446_manutenção_de_inventário_beestock.jpg|}}

When you click Proceed, the confirmation message Successfully updated! will be displayed, and the statuses of the previously selected tags will change to Approved.

{{:beestock:5.movimentacao:4.inventario:0447_manutenção_de_inventário_beestock.jpg|}}

It is also possible to Cancel Tags by selecting the desired tags and clicking Cancel Tags.

{{:beestock:5.movimentacao:4.inventario:0448_manutenção_de_inventário_beestock.jpg|}}

You will be asked to confirm the logged-in user's password.

{{:beestock:5.movimentacao:4.inventario:0449_manutenção_de_inventário_beestock.jpg|}}

You must enter the reason for cancellation.

{{:beestock:5.movimentacao:4.inventario:0450_manutenção_de_inventário_beestock.jpg|}}

The confirmation message Successfully updated! will be displayed, and the tag status will change to Canceled.

{{:beestock:5.movimentacao:4.inventario:0451_manutenção_de_inventário_beestock.jpg|}}

On this screen, you can also add a new Product/Address to the current grouper. To do this:

Click +Add Product/Address.

Select Address or Product, make the selection, and click Add.

{{:beestock:5.movimentacao:4.inventario:0452_manutenção_de_inventário_beestock.jpg|}}

The confirmation message Successfully added will be displayed, and the address/product in question will be included in this grouper so that it can be associated with a user and inventoried on the [[beestock/5.movimentacao/4.inventario/3.usuario_de_contagem|Counting User]] screen normally.

{{:beestock:5.movimentacao:4.inventario:0453_manutenção_de_inventário_beestock.jpg|}}
====== Update Inventory Tag ======

Located in the Movement > Inventory > Update Inventory Tag menu, on this screen you can update inventory tags. To do this:

Select the Branch.

Select the Grouper.

Click Search.

{{:beestock:5.movimentacao:4.inventario:0458_atualizar_ficha_de_inventário_beestock.jpg|}}

On the screen below, select the tags you want to update using the checkbox.
Use code with caution.
\
2. Click Update.

{{:beestock:5.movimentacao:4.inventario:0459__atualizar_ficha_de_inventário_beestock.jpg|}}

The message XX tags were selected! Do you want to proceed with the update? will be displayed. Click Proceed.

{{:beestock:5.movimentacao:4.inventario:0460_atualizar_ficha_de_inventário_beestock.jpg|}}

The confirmation message Tags were successfully updated will be displayed.

{{:beestock:5.movimentacao:4.inventario:0461_atualizar_ficha_de_inventário_beestock.jpg|}}

If you want to Reject Tags, you must select them and click Reject Tags.
====== Approval Levels ======

Located in the Movement > Inventory > Approval Levels menu, this screen is used to configure the approval levels for each user by branch and inventory type.

{{:beestock:5.movimentacao:4.inventario:0431_monitor_de_inventário_beestock.jpg|}}

When you click +Add Approval Level, the following screen will open:

{{:beestock:5.movimentacao:4.inventario:0432_monitor_de_inventário_beestock.jpg|}}

Select:

• Branch
• Inventory Type.

Cycle Counting

General
• Observation (Optional).

{{:beestock:5.movimentacao:4.inventario:0433_monitor_de_inventário_beestock.jpg|}}

Click Create at the bottom of the screen.

{{:beestock:5.movimentacao:4.inventario:0434_monitor_de_inventário_beestock.jpg|}}

The confirmation message Record successfully created will be displayed.

{{:beestock:5.movimentacao:4.inventario:0435_monitor_de_inventário_beestock.jpg|}}
====== Physical Inventory ======

Located in the Movement > Inventory > Physical Inventory menu, this screen allows you to adjust the balance only in WMS BeeStock®. This means that no stock balance movement integrations will be sent to the ERP.

To perform a physical inventory adjustment (only in WMS), fill in the fields below with valid information that has a balance in stock in WMS:

Branch - According to the user's access permission.

Address.

EAN - Valid barcode in [[beestock:3.cadastros:2.produtos:2.ean|EAN Registration]].

Batch - If any.

Expiration Date - If any.

Quantity.

Click Confirm.

{{:beestock:5.movimentacao:4.inventario:0185_inventário_físico_beestock.jpg|}}

When you click Confirm, the confirmation message Adjustment performed will be displayed.

{{:beestock:5.movimentacao:4.inventario:0186_inventário_físico_beestock.jpg|}}

To illustrate, here is the balance before confirming the inventory above, where on the [[beestock:6.consultas:1.estoque:1.saldo_estoque|Stock Balance]] screen the product was 2 PCs:

{{:beestock:5.movimentacao:4.inventario:0187_inventário_físico_beestock.jpg|}}

When the physical inventory was confirmed, the balance was adjusted to 100 PCs.

{{:beestock:5.movimentacao:4.inventario:0188_inventário_físico_beestock.jpg|}}

Below is a screenshot of the [[beestock:6.consultas:1.estoque:2.movimentos_estoque|Stock Movements]] screen performed only in WMS:

Where an Inbound of the ACT operation type (Adjustment via physical inventory) was performed, adding 98 pieces of the item to the adjusted address, leaving the balance at 100 PCs as performed via physical inventory.

{{:beestock:5.movimentacao:4.inventario:0189_inventário_físico_beestock.jpg|}}

If the user wishes to zero the product balance, they must enter the quantity as 0 (zero).
====== Inventory Flow - Collector ======

The Inventory menu is intended to group screens related to inventory.

{{:beestock:5.movimentacao:4.inventario:0489_fluxo_inventário_coletor_beestock.jpg?400|}}

The first option, Inventory > Inventory, will perform the Standard inventory of BeeStock. This means that integrations with the ERP will be generated for stock balance movements in case of tag updates with discrepancies.

{{:beestock:5.movimentacao:4.inventario:0490_fluxo_inventário_coletor_beestock.jpg?400|}}

The following should be confirmed:

Address – Scan the physical label attached to the product location.

Physical EAN of the product.

{{:beestock:5.movimentacao:4.inventario:0491_fluxo_inventário_coletor_beestock.jpg?400|}}

Scroll down the screen and enter the physically counted quantity at the address.

{{:beestock:5.movimentacao:4.inventario:0492_fluxo_inventário_coletor_beestock.jpg?400|}}

When you click CONFIRM, the confirmation message Counting performed! will be displayed.

{{:beestock:5.movimentacao:4.inventario:0493_fluxo_inventário_coletor_beestock.jpg?400|}}

In cases where there are no units of the product at the address, you must:

Scan the address label normally.

In the EAN field, press enter on the virtual or physical keyboard of the collector, with the field blank, i.e., without any information on the screen.

As this is a scenario where the product does not physically exist, it will not be possible to scan the product barcode. Therefore, when pressing enter with the empty field, the system will understand that the quantity is 0.

Remember that you should not enter quantity = 0, but simply press enter in the empty EAN field.

{{:beestock:5.movimentacao:4.inventario:0494_fluxo_inventário_coletor_beestock.jpg?400|}}

The confirmation message This address is empty will be displayed. Click Confirm.

{{:beestock:5.movimentacao:4.inventario:0495_fluxo_inventário_coletor_beestock.jpg?400|}}

The confirmation message Counting performed! will be displayed, and the tag will be entered with counted quantity = 0 for the current count.

{{:beestock:5.movimentacao:4.inventario:0496_fluxo_inventário_coletor_beestock.jpg?400|}}

==== Collector Flow Screen - Physical Inventory ====

In the second option, Inventory > Physical Inventory, this screen allows you to adjust the balance only in WMS BeeStock®. This means that no stock balance movement integrations will be sent to the ERP.

{{:beestock:5.movimentacao:4.inventario:0497_fluxo_inventário_coletor_beestock.jpg?400|}}

When opening the Physical Inventory screen, you will be asked to confirm the following:

Branch

Address

EAN

Quantity

Press Confirm.

{{:beestock:5.movimentacao:4.inventario:0498_fluxo_inventário_coletor_beestock.jpg?400|}}

The confirmation message Adjustment performed will be displayed, and the product will be entered or picked from the specified address, leaving the quantity entered in the physical count, without involving any movements with the ERP.

{{:beestock:5.movimentacao:4.inventario:0499_fluxo_inventário_coletor_beestock.jpg?400|}}
====== Batch Label ======

Located in the Movement > Labels > Batch Labels menu, this screen is used to print Batch labels.

{{:beestock:5.movimentacao:5.etiquetas:0054_etiqueta_lote_beestock.jpg|}}

Step-by-step instructions to print the Batch label:

On the Batch Label screen, fill in the following information:

Abbreviation
** The abbreviation field can be used to customize batch labels using up to three characters, automatically incrementing the three characters at the end of the sequential batch. For example: Abbreviation REC, the label will be generated with the batch: L1 + REC, resulting in L1REC.

Quantity to Generate
** Fill in the quantity according to your needs.

Click Proceed.

{{:beestock:5.movimentacao:5.etiquetas:0055_etiqueta_lote_beestock.jpg|}}

Select the printer from the list.

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0056_etiqueta_lote_beestock.jpg|}}

The confirmation message Printing labels XX to XX on printer Teste01 will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0057_etiqueta_lote_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0058_etiqueta_lote_beestock.jpg|}}

Size: 5cm x 2.2cm

Name: Batch - lot.js

Path: /movement/label/lot

Example Data: L14REC

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0004_etiqueta_lote_beestock.zip |}}

====== EAN Label ======

Located in the Movement > Labels > EAN Labels menu, this screen is used to print EAN labels.

Step-by-step instructions to print the EAN label:

On the EAN Label screen, fill in the following information:

EAN

Number of Labels

Enter the desired number of labels.

Click Print.

Select the printer from the list.

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0046_etiqueta_ean_beestock.jpg|}}

The confirmation message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0047_etiqueta_ean_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0048_etiqueta_ean_beestock.jpg|}}

Size: 5cm x 2.2cm

Name: EAN - ean.js

Path: /movement/label/ean

Example Data: Item 1004633

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0002_etiqueta_ean_beestock.zip |}}
====== Receipt Batch Label ======

Located in the Movement > Labels > Receipt Batch Labels menu, this screen is used to print Receipt Batch labels.

{{:beestock:5.movimentacao:5.etiquetas:0059_etiqueta_batismo_recebimento_beestock.jpg|}}

Step-by-step instructions to print the Receipt Batch label:

On the Generate Batch screen, fill in the following information:

Quantity to Generate

Enter the desired number of labels.

Click Generate Batch.

Click Proceed.

{{:beestock:5.movimentacao:5.etiquetas:0060_etiqueta_batismo_recebimento_beestock.jpg|}}

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0061_etiqueta_batismo_recebimento_beestock.jpg|}}

The confirmation message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0062_etiqueta_batismo_recebimento_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0065_etiqueta_batismo_recebimento_beestock.jpg|}}

Size: 6cm x 4cm

Path: /movement/label/baptism

Example Data: Batch 1488

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0005_etiqueta_batismo_recebimento_beestock.zip |}}

====== Shipping Batch Label ======

Located in the Movement > Labels > Shipping Batch Label menu, this screen is used to print Shipping Batch labels.

{{:beestock:5.movimentacao:5.etiquetas:0041_etiqueta_batismo_expedição_beestock.jpg|}}

Step-by-step instructions to print the Shipping Batch label:

On the Generate Batch screen, fill in the following information:

Quantity to Generate

Enter the desired number of labels.

Click Generate Batch.

Click Proceed.

{{:beestock:5.movimentacao:5.etiquetas:0042_etiqueta_batismo_expedição_beestock.jpg|}}

Select the printer from the list.

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0043_etiqueta_batismo_expedição_beestock.jpg|}}

The confirmation message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0044_etiqueta_batismo_expedição_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0047_etiqueta_batismo_expedição_beestock.jpg|}}

Size: 6cm x 4cm

Name: baptism.js

Path: /movement/label/baptism

Example Data: Batch 5369

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0001_etiqueta_batismo_expedição_beestock.zip |}}
====== Transfer Batch Label ======

Located in the Movement > Labels > Transfer Batch Label menu, this screen is used to print Transfer Batch labels.

{{:beestock:5.movimentacao:5.etiquetas:0049_etiqueta_batismo_transferência_beestock.jpg|}}

Step-by-step instructions to print the Transfer Batch label:

On the Generate Batch screen, fill in the following information:

Quantity to Generate

Enter the desired number of labels.

Click Generate Batch.

Click Proceed.

{{:beestock:5.movimentacao:5.etiquetas:0050_etiqueta_batismo_transferência_beestock.jpg|}}

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0051_etiqueta_batismo_transferência_beestock.jpg|}}

The confirmation message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0052_etiqueta_batismo_transferência_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0055_etiqueta_batismo_transferência_beestock.jpg|}}

Size: 6cm x 4cm

Path: /movement/label/baptismTra

Example Data: Batch 48

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0003_etiqueta_batismo_transferência_beestock.zip |}}
====== Address Label ======

Located in the Movement > Labels > Address Label menu, this screen displays a message informing that only up to 100 labels will be printed at a time. If you try to print more than that, no labels will be printed.

Step-by-step instructions to print the Address label:

Click Understood to continue.

{{:beestock:5.movimentacao:5.etiquetas:0076_etique_endereço_beestock.jpg|}}

On the Address Label screen, fill in the following information:

Branch

Address

Sector

Aisle

Column

Level

Bin

Click Print.

{{:beestock:5.movimentacao:5.etiquetas:0077_etique_endereço_beestock.jpg|}}

Select the printer from the list.

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0078_etique_endereço_beestock.jpg|}}

The confirmation message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0079_etique_endereço_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0080_etique_endereço_beestock.jpg?400|}}

Size: 10cm x 2.5cm

Name: address.js

Path: /movement/label/address

Example Data: S01R01M02A04G04

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0006_etiqueta_endereço_beestock.zip |}}
====== Package Label ======

Located in the Movement > Labels > Package Label menu, this screen is used to print package labels.

{{:beestock:5.movimentacao:5.etiquetas:0298_etiqueta_volume_beestock.jpg|}}

Step-by-step instructions to print the package label:

On the Package Label screen, fill in the following information:

Outbound Document.

Click Search.

The message X package(s) found will be displayed.

The packages will be presented next.

{{:beestock:5.movimentacao:5.etiquetas:0299_etiqueta_volume_beestock.jpg|}}

The Select All and Deselect All buttons are also available for use.

After selecting the packages to be printed, click the Print button.

The message "Are you sure?" will be displayed.

Click the Confirm button.

{{:beestock:5.movimentacao:5.etiquetas:0300_etiqueta_volume_beestock.jpg|}}

Select the printer from the list.

Click Select.

{{:beestock:5.movimentacao:5.etiquetas:0301_etiqueta_volume_beestock.jpg|}}

The message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0302_etiqueta_volume_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0303_etiqueta_volume_beestock.jpg|}}

Size: 10.5cm x 7.2cm

Name: conferenceVolume.js

Path: /movement/label/volume

Example Data: 1240000000006216

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0008_etiqueta_volume_beestock.zip |}}
====== Kardex Label - Cable Cutting ======

Located in the Movement > Labels > Kardex Labels - Cable Cutting menu, this screen is used to print Kardex labels to identify the lengths contained in each reel at their respective addresses/batches.

{{:beestock:5.movimentacao:5.etiquetas:0130_etiqueta_kardex__corte_de_cabos_beestock.jpg|}}

Step-by-step instructions to print the Kardex label - cable cutting:

On the Kardex Label - Cable Cutting screen, fill in the following information:

Product Code

Address Code

Batch Number

Click Reprint.

Select the printer from the list.

Click Select to print.

{{:beestock:5.movimentacao:5.etiquetas:0131_etiqueta_kardex__corte_de_cabos_beestock.jpg|}}

The confirmation message Labels sent to printer! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0132_etiqueta_kardex__corte_de_cabos_beestock.jpg|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0133_etiqueta_kardex__corte_de_cabos_beestock.jpg|}}

Size: 5cm x 2.2cm

Name: cableCut.js

Path: /movement/label/kardexCableCut

Example Data:

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0007_etiqueta_kardex_corte_de_cabos_beestock.zip |}}

====== Label Printing Flow - Collector ======

Located on the collector in the Goods Receipt > EAN Label option, this screen is used to print EAN labels.

Step-by-step instructions to print the EAN label:

Tap Goods Receipt.

{{:beestock:5.movimentacao:5.etiquetas:0377_fluxo_impressão_de_etiquetas_beestock.jpg?400|}}

Then tap EAN Label.

{{:beestock:5.movimentacao:5.etiquetas:0378_fluxo_impressão_de_etiquetas_beestock.jpg?400|}}

Next, fill in the EAN field with the EAN of your choice.

{{:beestock:5.movimentacao:5.etiquetas:0379_fluxo_impressão_de_etiquetas_beestock.jpg?400|}}

Tap the printer button.

Select the desired printer.

{{:beestock:5.movimentacao:5.etiquetas:0380_fluxo_impressão_de_etiquetas_beestock.jpg?400|}}

The message Printing successful! will be displayed.

{{:beestock:5.movimentacao:5.etiquetas:0381_fluxo_impressão_de_etiquetas_beestock.jpg?400|}}

Below is the standard layout of the label that will be printed.

{{:beestock:5.movimentacao:5.etiquetas:0382_fluxo_impressão_de_etiquetas_beestock.jpg|}}

Size: 5cm x 2.2cm

Name: EAN - ean.js

Path: /movement/label/ean

Example Data: Item 1004633

ZPL Code: {{ :beestock:5.movimentacao:5.etiquetas:0009_fluxo_de_impressão_de_etiquetas_beestock.zip |}}
====== Reports ======

===== Report Example =====

Located in the Reports menu, all available reports in BeeStock® can be extracted from the report screens.

Access the desired report from the menu. Below is a list of the available reports in the system:

===== Administration =====

=== General ===

Report - Companies

Report - Branches

=== Users ===

Report - Users

Report - Departments

===== Registrations =====

=== General ===

Report - Warehouses

Report - Stock Locations

Report - Docks

Report - Ranges x Users

Report - Ranges x Addresses x Users

Report - Ranges

Report - Addresses

Report - Customers

Report - Suppliers

Report - Priorities

Report - Carriers

Report - Address Types

=== Products ===

Report - Products

Report - EAN

Report - Packaging

Report - Products x Customer

Report - Products x Branch

Report - Units of Measure

=== Equipment ===

Report - Printers

===== Stock =====

Report - Stock Movement x Address

Report - Stock Balance

Report - Empty Addresses

Report - Address Allocation

Report - Expired Product

===== KPIs =====

Report - Receiving Checking Qty Products per Checker

Report - Shipping Checking Qty Products per Checker

Report - Discrepancies Product Curve

Report - Qty of Products Stored per User

Report - Qty Products Picked by Date and User

Report - Sales Order Status

Report - Remnants

Report - Product Picking by Date

===== Movement =====

=== Shipping ===

Report - Outbound Documents

Report - Outbound Documents - Products

Report - Packages per Document

=== Receiving ===

Report - Inbound Documents

Report - Inbound Documents - Products

Report - Pre-Receipt Invoice

=== Inventory ===

Report - Inventory Count

To extract a report, follow the steps numbered in the example screenshot below:

• 1 – In Available Columns, select the desired fields (one by one, or make a multiple selection by holding down the Control key on your keyboard).

• 2 – Click the >> arrow to select the marked fields.

• 3 – Selected Columns will list the columns selected to be exported in the report in question.

• 4 – The reports have the Standard Filter option, where you can save a Private or Public template to be used in the future, so OPTIONALLY you can save the filter to use it later.

{{:beestock:0198_relatórios_beestock.jpg|}}

At the bottom, in Filters, enter the desired filters (Step 5) and click Generate Spreadsheet (Step 6).

{{:beestock:0199_relatórios_beestock.jpg|}}

The download will start automatically in Excel format.

{{:beestock:0200_relatórios_beestock.jpg|}}

Only the selected columns will be exported.

{{:beestock:0201_relatórios_beestock.jpg|}}

Here are the details for using the Standard Filter:

You must enter:

Filter Name

Type: Private or Public

Click Save

{{:beestock:0202_relatórios_beestock.jpg|}}

The message Filter saved successfully! will be displayed.

To use the filter in the future, select it from the list, and the columns previously saved when creating the filter will be loaded in the Selected Columns field.

{{:beestock:0203_relatórios_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Receiving Dashboard ======
Located in the Dashboard > Receiving > Status by Document menu, the Receiving Dashboard is used for visual management of the receiving data in a clear and objective way.

Access the Dashboard > Receiving > Status by Document menu.

{{:beestock:8.dashboards:1.recebimento:0244_dashboard_recebimento_beestock.jpg|}}

When you open the Status by Document screen in receiving, a backend search will be performed to collect the data of the inbound orders. By default, the start date and end date parameters will be for a one-month period, selecting all branches. After loading, the user can change the parameters as desired.

The dashboard is divided into four elements:

Document Analysis by Status:

STORED: Sum of the number of inbound documents with stored status

PHYSICAL CHECK PENDING: Sum of the number of inbound documents with physical check pending status

PHYSICAL CHECK STARTED: Sum of the number of inbound documents with physical check started status

PHYSICAL CHECK COMPLETED: Sum of the number of inbound documents with physical check completed status

LICENSE PLATE PENDING: Sum of the number of inbound documents with license plate pending status

IN STORAGE: Sum of the number of inbound documents with in storage status

CANCELED: Sum of the number of inbound documents with canceled status

{{:beestock:8.dashboards:1.recebimento:0245_dashboard_recebimento_beestock.jpg|}}

Lines Stored per Day:

Column chart showing an analysis by lines (products received)

On the X axis, it displays the document creation date, according to the period selected in the branch and date filter.

On the Y axis, it displays the sum of the number of lines (products) stored in the period defined in the date filter.

Horizontal line tracing the average of the selected period.

Number of Pending Lines by Status:

Donut chart, presenting the data by lines (products), containing all pending records separated by status and filtered by the date period and branch entered at the top of the screen.

Status name

Number of lines per status

% they represent of the total.

{{:beestock:8.dashboards:1.recebimento:0246_dashboard_recebimento_beestock.jpg|}}

Table with all the data used to create the Dashboard:

Facilitator panel to consult documents listing all inbound documents within the date period and branch defined in the filter, also allowing manual filters field by field by the user. Fields displayed:

Actions: Enabling actions on the row, currently only has details action, where it presents the document at the item level.

Branch: Document branch

Document: Document number

Supplier: Supplier Description/Name

Type: Receipt Type

Status: Receipt Document Status

Delivery Date: The delivery date

Packages: Packages received

Products: Receipt products

Progress: Percentage to complete the Receipt.

{{:beestock:8.dashboards:1.recebimento:0247_dashboard_recebimento_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Status by Document - Shipping ======
Located in the Dashboard > Shipping > Status by Document menu, the Shipping Dashboard is used for visual management of the shipping data in a clear and objective way.

Access the Dashboard > Shipping > Status by Document menu.

{{:beestock:8.dashboards:2.expedicao:0153_dashboard_expedição_beestock.jpg|}}

To start the test, you must select at least a date range – If no branch is selected, it will consider all branches registered for the user.

{{:beestock:8.dashboards:2.expedicao:0154_dashboard_expedição_beestock.jpg|}}

When performing the query by clicking the button with the magnifying glass, if there is data in the informed date range, the cards, charts, and tables should receive their values individually.

Cards:

The data is generated based on the document date, i.e., it is the current status of each document that was created within the informed date range.

{{:beestock:8.dashboards:2.expedicao:0155_dashboard_expedição_beestock.jpg|}}

Line chart:

The data is generated based on the checking date, i.e., the number of products checked corresponds to the number checked on the informed day(s) - There is no connection with the number of documents on that day.

Donut/Ring chart:

The data is generated considering the product creation date and presents the current day's status.

{{:beestock:8.dashboards:2.expedicao:0156_dashboard_expedição_beestock.jpg|}}

Standard document table:

As in the Cards, it includes the documents created in the informed date range.

{{:beestock:8.dashboards:2.expedicao:0157_dashboard_expedição_beestock.jpg|}}

In the table, there is the Actions > Details button, which will take you to the details of the selected document:

{{:beestock:8.dashboards:2.expedicao:0158_dashboard_expedição_beestock.jpg|}}

{{:beestock:8.dashboards:2.expedicao:0159_dashboard_expedição_beestock.jpg|}}

{{:beestock:8.dashboards:2.expedicao:0160_dashboard_expedição_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Inventory Tracking ======
Located in the Dashboard > Inventory > Overall Status by Branch menu, the Inventory Dashboard is used for visual management of inventory data in a clear and objective way.

Access the Dashboard > Inventory > Overall Status by Branch menu.

{{:beestock:8.dashboards:3.inventario:0204_dashboard_inventário_beestock.jpg|}}

To start the test, we must select at least a date range and a branch. If groupers or warehouses are not selected, all available ones will be considered.

{{:beestock:8.dashboards:3.inventario:0205_dashboard_inventário_beestock.jpg|}}

When performing the query by clicking the button with the magnifying glass, if there is data in the informed date range, the cards, charts, and tables should receive their values individually.

Donut/Ring chart:

The data is generated based on the grouper date, i.e., it is the current status of each inventory tag where its grouper was inventoried (Inventory In column) within the informed date range.

{{:beestock:8.dashboards:3.inventario:0206_dashboard_inventário_beestock.jpg|}}

Speedometer/Gauge chart:

Uses the % of tags where the first count was already Counting Finished, i.e., the right product was in the right place with the right quantity. So we understand that the accuracy was OK at the time of counting.

{{:beestock:8.dashboards:3.inventario:0207_dashboard_inventário_beestock.jpg|}}

Counts:

Detailed current situation of each count from the total number of tags according to the filter.

{{:beestock:8.dashboards:3.inventario:0208_dashboard_inventário_beestock.jpg|}}

Bar chart:

Pending tags for each count according to the filter.

{{:beestock:8.dashboards:3.inventario:0209_dashboard_inventário_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Stock Dashboard - Address Occupancy ======
Located in the Dashboard > Stock > Address Occupancy menu, the Stock Dashboard is used for visual management of stock data in a clear and objective way.

Access the Dashboard > Stock > Address Occupancy menu.

{{:beestock:8.dashboards:4.inventario:0191_dashboard_inventário_beestock.jpg|}}

The first speedometer/gauge chart shows the percentage of stock occupancy. In the following panels, this is displayed in numbers:

{{:beestock:8.dashboards:4.inventario:0192_dashboard_inventário_beestock.jpg|}}

Then, the bar chart shows the occupancy separated by stock sectors:

{{:beestock:8.dashboards:4.inventario:0193_dashboard_inventário_beestock.jpg|}}

Again, in the bar chart, we have the occupancy separated by classification:

{{:beestock:8.dashboards:4.inventario:0194_dashboard_inventário_beestock.jpg|}}

In our last bar chart, we have the occupancy separated by address type:

{{:beestock:8.dashboards:4.inventario:0195_dashboard_inventário_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Developer ======
===== Languages =====

Located in the Developer > Languages menu, the Languages screen allows you to change the description (label) of fields, menus, and messages in Portuguese, Spanish, and English for both BeeStock® WEB and Collector.

Access the Languages screen.

1 - Use the filter to find the text you want to change in the system.

2 – In the desired key, click Actions.

3 – Click Edit.

{{:beestock:9.desenvolvedor:0181_idiomas_beestock.jpg|}}

Change the display of this key in Portuguese, Spanish, and English as desired.

In the example below, we changed:

Portuguese: Gaveta > Posição

Spanish: Cajón > Posición

English: Drawer > Position

{{:beestock:9.desenvolvedor:0182_idiomas_beestock.jpg|}}

The confirmation message Language BEEXXX successfully updated! will be displayed:

{{:beestock:9.desenvolvedor:0183_idiomas_beestock.jpg|}}

In this example, all places in the WEB and Collector where the word Gaveta appeared were changed to display the word Posição, as modified in the Languages registration.

For example, in the screenshot below of the screen when consulting the address registration, where field BEE285 is displayed.

{{:beestock:9.desenvolvedor:0184_idiomas_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Stock Balance ======
Located in the Inquiries > Inventory > Stock Balance menu, this screen lists all items and their respective stock balances.

{{:beestock:6.consultas:1.estoque:0114_saldo_estoque_beestock.jpg|}}

You can filter by:

Branch

Warehouse

Product

Description

Address

Manufacturer

Expiration Date

Complementary Code

Batch

Movement User

Movement Date

Complementary Information

Last Receipt User

Last Receipt Date

Last Count User

Last Count Date

Manufacturing Date

Observation

The Available column is the total quantity minus the quantity allocated to all orders.

The Allocated column is the quantity that is allocated to orders.

The Quantity column is the total quantity in the system, adding the available and allocated quantities.

{{:beestock:6.consultas:1.estoque:0115_saldo_estoque_beestock.jpg|}}

When a line is red, it is because the item has exceeded its expiration date:

{{:beestock:6.consultas:1.estoque:0116_saldo_estoque_beestock.jpg|}}

{{:beestock:6.consultas:1.estoque:0117_saldo_estoque_beestock.jpg|}}

When picking the material at the address via collector, for example, the allocated quantity is already deducted from the balance, making the adjustment in WMS.
====== Stock Movements ======

Located in the Inquiries > Inventory > Stock Movements menu, this screen lists all stock movements.

{{:beestock:6.consultas:1.estoque:0118_movimentos_estoque_beestock.jpg|}}

In addition to the date filter at the top of the page, you can also filter by columns:

Type

Operation

Document

Warehouse

Product

Batch

Description

Quantity

Unit

Address

Lot

Movement Date

Movement User

Branch

Observation

In this example, we see the receipt process, where an NFE moves from the REC warehouse to WMS and, after the receipt process, goes to the RV1 warehouse:

{{:beestock:6.consultas:1.estoque:0119_movimentos_estoque_beestock.jpg|}}

In this example, we see the shipping process, where the generated shipment is shipped, and the balance leaves RV1:

{{:beestock:6.consultas:1.estoque:0120_movimentos_estoque_beestock.jpg|}}

In this example, we see the manual inventory process, where the balance is corrected manually:

{{:beestock:6.consultas:1.estoque:0121_movimentos_estoque_beestock.jpg|}}

In this example, we see the Inventory process, where the balances are transferred to the INV warehouse and, after the inventory process, are transferred back to RV1:

{{:beestock:6.consultas:1.estoque:0122_movimentos_estoque_beestock.jpg|}}
====== ERP Stock ======

Located in the Inquiries > Inventory > ERP Stock menu, this screen lists all stock balances in the ERP.

{{:beestock:6.consultas:1.estoque:0093_estoque_erp_beestock.jpg|}}

In addition to the date filter at the top of the page, you can also filter by columns:

Branch

Warehouse

Product

Description

Quantity

Unit

Address

Batch

FIFO Date

Expiration Date

Observation
====== Stock Balance - Details ======
====== Stock Balance - Details ======

Located in the Inquiries > Inventory > Stock Balance - Details menu, this screen lists the product balances with more detailed information.

{{:beestock:6.consultas:1.estoque:0128_saldo_do_estoque_detalhes_beestock.jpg|}}

You can filter by columns:

Branch

Product

Description

Manufacturer

Complementary Code

Complementary Information

We can see the difference between the Quantity, Available, and Allocated columns, which were explained in the [[beestock/6.consultas/1.estoque/1.saldo_estoque|Stock Balance]] Manual.

{{:beestock:6.consultas:1.estoque:0129_saldo_do_estoque_detalhes_beestock.jpg|}}
====== Average Cost ======

Located in the Inquiries > Inventory > Average Cost menu, this screen lists the average cost of the registered products.

{{:beestock:6.consultas:1.estoque:0094_custo_médio_beestock.jpg|}}

You can filter by columns:

Branch

Warehouse

Product

Description

Average Cost Date

Observation

Creation User

Creation Date

Modification User

Modification Date
====== Stock Balance Comparison ======

Located in the Inquiries > Inventory > Stock Balance Comparison menu, this screen lists the products and compares the balances between BeeStock® and the ERP.

{{:beestock:6.consultas:1.estoque:0075_comparativo_saldo_estoque_beestock.jpg|}}

You can filter by columns:

Product

Description

Inventory Control

Control Expiration Date

Manufacturer

There is also the Reprocess ERP Stock button, which, when clicked, will reprocess the existing balance in the ERP.
====== Collector Flow ======

==== Collector - Inquiries ====

Located in the Inquiries menu, this screen allows us to perform three types of inventory inquiries:

==== Collector - Inventory Inquiries =====

Located in the Inquiries > Inventory menu, this screen lists the item and its respective stock balance.

{{:beestock:6.consultas:1.estoque:0356_consultas_estoque_beestock.jpg?400|}}

{{:beestock:6.consultas:1.estoque:0357_consultas_estoque_beestock.jpg?400|}}

{{:beestock:6.consultas:1.estoque:0358_consultas_estoque_beestock.jpg?400|}}

Enter or scan the EAN of the product for which you want to check the stock balance:

{{:beestock:6.consultas:1.estoque:0359_consultas_estoque_beestock.jpg?400|}}

You can use the Broom to clear the searched data.

==== Collector - Address Inquiries ====

Located in the Inquiries > Address menu, this screen will list the address and the items located there, along with their respective stock balances.

{{:beestock:6.consultas:1.estoque:0360_consultas_estoque_beestock.jpg?400|}}

{{:beestock:6.consultas:1.estoque:0361_consultas_estoque_beestock.jpg?400|}}

{{:beestock:6.consultas:1.estoque:0362_consultas_estoque_beestock.jpg?400|}}

Enter or scan the address to perform the inquiry:

{{:beestock:6.consultas:1.estoque:0363_consultas_estoque_beestock.jpg?400|}}

You can use the Broom to clear the searched data.

==== Collector - EAN Inquiries ====

Located in the Inquiries > EAN menu, this screen will list the item and its respective EAN.

{{:beestock:6.consultas:1.estoque:0364_consultas_estoque_beestock.jpg?400|}}

{{:beestock:6.consultas:1.estoque:0365_consultas_estoque_beestock.jpg?400|}}

{{:beestock:6.consultas:1.estoque:0366_consultas_estoque_beestock.jpg?400|}}

Enter or scan the item:

{{:beestock:6.consultas:1.estoque:0367_consultas_estoque_beestock.jpg?400|}}

By clicking on the printer, you can print the EAN label:

{{:beestock:6.consultas:1.estoque:0368_consultas_estoque_beestock.jpg?400|}}

After selecting the number of labels, select the printer:

{{:beestock:6.consultas:1.estoque:0369_consultas_estoque_beestock.jpg?400|}}

You can also link the item to an EAN using the Link button:

{{:beestock:6.consultas:1.estoque:0370_consultas_estoque_beestock.jpg?400|}}
====== Inbound Documents ======

Located in the Inquiry > Receiving > Inbound Document menu, this screen allows you to inquire about inbound documents.

{{:beestock:6.consultas:2.recebimento:0134_documentos_de_entrada_beestock.jpg|}}

You can filter by:

Date

Documents

Branch

Supplier

Status

Type

Carrier

Packages

On the initial screen, you can view information such as:

License Plate Check

Physical Check Pending

Physical Check Started

Storage

Completed

Canceled
====== Batch Label ======
====== Inbound Batch Label ======

Located in the Inquiries > Receiving > Inbound Batch Label menu, this screen allows you to inquire about inbound batch labels that have already been created.

Step-by-step instructions to inquire about an inbound batch label:

Enter an existing batch number.

Click Search.

The inquiry message X product(s) found will be displayed.

You can filter by:

Branch

Product

Document Number

Status

Product Description

{{:beestock:6.consultas:2.recebimento:0190_etiqueta_batismo_de_entrada_beestock.jpg|}}
====== Receiving Inquiries Flow - Collector ======

Located in the collector under Inquiry > Inbound Batch Label, this screen allows you to inquire about inbound batch labels.

Step-by-step instructions to inquire about an inbound batch label:

Click Inquiry.

{{:beestock:6.consultas:2.recebimento:0412_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

Click Inbound Batch Label.

{{:beestock:6.consultas:2.recebimento:0413_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

Fill in the Batch field with the batch of your choice to perform the inquiry.

{{:beestock:6.consultas:2.recebimento:0414_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

In the inquiry, you can view the following information:

Item

Invoice

Status

Description

To inquire about the invoice, go to Inquiry.

{{:beestock:6.consultas:2.recebimento:0415_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

Click Invoice.

{{:beestock:6.consultas:2.recebimento:0416_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

Fill in the Invoice field with the desired invoice.

{{:beestock:6.consultas:2.recebimento:0417_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

In the inquiry, you can view the following information:

Seq

Item

Batch

To inquire about EAN, go to Inquiry.

{{:beestock:6.consultas:2.recebimento:0418_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

Click EAN.

{{:beestock:6.consultas:2.recebimento:0419_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

In the inquiry, you can view the following information:

Product Code

UoM

Description

By clicking the Printer button, you can enter the number of labels.

{{:beestock:6.consultas:2.recebimento:0420_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}

Once this is done, just click CONFIRM.

The message Printing successful! will be displayed.

{{:beestock:6.consultas:2.recebimento:0421_fluxo_consultas_recebimento_coletor_beestock.jpg?400|}}
====== Checking ======
====== Outbound Checking ======

Located in the Inquiry > Shipping > Checking menu, this screen allows you to inquire about outbound checkings.

{{:beestock:6.consultas:3.expedicao:0284_conferência_beestock.jpg|}}

You can filter by:

Date

Document

Branch

Customer

Urgent

Customer Order

Document Date
====== Batch Label ======
====== Outbound Batch Label ======

Located in the Inquiries > Shipping > Batch Label menu, this screen allows you to inquire about batch labels that have already been created.

{{:beestock:6.consultas:3.expedicao:0148_etiqueta_batismo_de_saída_beestock.jpg|}}

Step-by-step instructions to inquire about an outbound batch label:

Enter an existing batch number.

Click Search.

The inquiry message X product(s) found will be displayed.

You can filter by:

Product

Document Number

Status

Product Description

{{:beestock:6.consultas:3.expedicao:0149_etiqueta_batismo_de_saída_beestock.jpg|}}
====== Outbound Documents ======

Located in the Inquiries > Shipping > Outbound Documents menu, this screen lists all outbound documents.

{{:beestock:6.consultas:3.expedicao:0196_documentos_de_saída_beestock.jpg|}}

You can filter by:

Document

Branch

Customer Order

Customer

Type

Invoice

Status

Carrier

City

Delivery

Integration

Dock Control

Packing List

{{:beestock:6.consultas:3.expedicao:0197_documentos_de_saída_beestock.jpg|}}

After filtering a document, you can view the products linked to the selected document. You can filter these products by:

Product

Description

Status

Quantity

Required Batch

Control Expiration Date

Inventory Control Type

Allocated

Picked

Picking Date

Picker

Checked

Checking Date

Customer Product
====== Shipping Inquiries Flow - Collector =====

Located in the collector under Inquiries > Outbound Batch Label, this screen is used to inquire about outbound batch labels.

Step-by-step instructions to inquire about an outbound batch label:

Click Inquiry.

{{:beestock:6.consultas:3.expedicao:0383_fluxo_consultas_expedição_beestock.jpg?400|}}

Then click Outbound Batch Label.

{{:beestock:6.consultas:3.expedicao:0384_fluxo_consultas_expedição_beestock.jpg?400|}}

Next, fill in the Batch field with the batch of your choice to perform the inquiry.

{{:beestock:6.consultas:3.expedicao:0385_fluxo_consultas_expedição_beestock.jpg?400|}}

In the inquiry, you can view the following information:

Document

Code

Name

Order

Invoice

Status

Item Qty

Picking Qty

Checking Qty

Range

Picker

Checker

Warehouse

Address
====== Reports ======

===== Report Example =====

Located in the Reports menu, all available reports in BeeStock® can be extracted from the report screens.

Access the desired report from the menu. Below is a list of the available reports in the system:

===== Administration =====

=== General ===

Report - Companies

Report - Branches

=== Users ===

Report - Users

Report - Departments

===== Registrations =====

=== General ===

Report - Warehouses

Report - Stock Locations

Report - Docks

Report - Ranges x Users

Report - Ranges x Addresses x Users

Report - Ranges

Report - Addresses

Report - Customers

Report - Suppliers

Report - Priorities

Report - Carriers

Report - Address Types

=== Products ===

Report - Products

Report - EAN

Report - Packaging

Report - Products x Customer

Report - Products x Branch

Report - Units of Measure

=== Equipment ===

Report - Printers

===== Stock =====

Report - Stock Movement x Address

Report - Stock Balance

Report - Empty Addresses

Report - Address Allocation

Report - Expired Product

===== KPIs =====

Report - Receiving Checking Qty Products per Checker

Report - Shipping Checking Qty Products per Checker

Report - Discrepancies Product Curve

Report - Qty of Products Stored per User

Report - Qty Products Picked by Date and User

Report - Sales Order Status

Report - Remnants

Report - Product Picking by Date

===== Movement =====

=== Shipping ===

Report - Outbound Documents

Report - Outbound Documents - Products

Report - Packages per Document

=== Receiving ===

Report - Inbound Documents

Report - Inbound Documents - Products

Report - Pre-Receipt Invoice

=== Inventory ===

Report - Inventory Count

To extract a report, follow the steps numbered in the example screenshot below:

• 1 – In Available Columns, select the desired fields (one by one, or make a multiple selection by holding down the Control key on your keyboard).

• 2 – Click the >> arrow to select the marked fields.

• 3 – Selected Columns will list the columns selected to be exported in the report in question.

• 4 – The reports have the Standard Filter option, where you can save a Private or Public template to be used in the future, so OPTIONALLY you can save the filter to use it later.

{{:beestock:0198_relatórios_beestock.jpg|}}

At the bottom, in Filters, enter the desired filters (Step 5) and click Generate Spreadsheet (Step 6).

{{:beestock:0199_relatórios_beestock.jpg|}}

The download will start automatically in Excel format.

{{:beestock:0200_relatórios_beestock.jpg|}}

Only the selected columns will be exported.

{{:beestock:0201_relatórios_beestock.jpg|}}

Here are the details for using the Standard Filter:

You must enter:

Filter Name

Type: Private or Public

Click Save

{{:beestock:0202_relatórios_beestock.jpg|}}

The message Filter saved successfully! will be displayed.

To use the filter in the future, select it from the list, and the columns previously saved when creating the filter will be loaded in the Selected Columns field.

{{:beestock:0203_relatórios_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>
====== Developer ======
===== Languages =====

Located in the Developer > Languages menu, the Languages screen allows you to change the description (label) of fields, menus, and messages in Portuguese, Spanish, and English for both BeeStock® WEB and Collector.

Access the Languages screen.

1 - Use the filter to find the text you want to change in the system.

2 – In the desired key, click Actions.

3 – Click Edit.

{{:beestock:9.desenvolvedor:0181_idiomas_beestock.jpg|}}

Change the display of this key in Portuguese, Spanish, and English as desired.

In the example below, we changed:

Portuguese: Gaveta > Posição

Spanish: Cajón > Posición

English: Drawer > Position

{{:beestock:9.desenvolvedor:0182_idiomas_beestock.jpg|}}

The confirmation message Language BEEXXX successfully updated! will be displayed:

{{:beestock:9.desenvolvedor:0183_idiomas_beestock.jpg|}}

In this example, all places in the WEB and Collector where the word Gaveta appeared were changed to display the word Posição, as modified in the Languages registration.

For example, in the screenshot below of the screen when consulting the address registration, where field BEE285 is displayed.

{{:beestock:9.desenvolvedor:0184_idiomas_beestock.jpg|}}

<WRAP center round info 30%>
Do you still have any questions?
\
Help us improve!
\
{{SZ_FEEDBACK}}

</WRAP>